설명
ECART 7 / ECART 10은(는) Oppent의 Industrial-Robot입니다. 사내 물류, 자재 취급, 운반 용도로 설계되었습니다. 주요 수치: 280 kg, 가동 시간 600분, 가반 하중 500 kg.
ECART 7 / ECART 10 is a model in Oppent's ECART family of autonomous mobile robots, built in Italy. Four driven wheels make it omnidirectional, and besides lifting 500 kg (700 kg maximum) it can tow up to 1,200 kg. Oppent lists ECART 7 and ECART 10 as two models with the same datasheet values; ECART 10 is shown in industrial use.\nPer its datasheet it measures 1,656 x 910 x 275 mm, weighs 280 kg without batteries and carries 500 kg nominal (700 kg maximum) on lift platform 1,100 x 750 mm, 100 mm stroke. It uses QUOD omnidirectional drive (4 x 600 W), travels at up to 1.2 m/s and climbs 3% slopes. It navigates naturally by laser scanner, positions to +/-10 mm and +/-1 deg and turns on its own axis, and runs about 10 hours on a Lithium NMC 2 x 24 V 64 Ah battery with 2.5 h recharge. Safety comes from 2 Sick S300 (PLd) and 2 Sick Scangrid2 (PLc) laser scanners, 2 e-stops, Sick Flexi safety controller, and the vehicle conforms to ISO 3691-4:2020 for driverless industrial trucks.
주요 기능
- Nominal payload 500 kg
- maximum 700 kg
- Equipment: lift platform 1,100 x 750 mm, 100 mm stroke
- Size 1,656 x 910 x 275 mm
- 280 kg without batteries
- Drive: QUOD omnidirectional drive (4 x 600 W)
- max speed 1.2 m/s
- slopes up to 3%
- Battery: Lithium NMC 2 x 24 V 64 Ah
- about 10 h autonomy, 2.5 h recharge
- Safety: 2 Sick S300 (PLd) and 2 Sick Scangrid2 (PLc) laser scanners, 2 e-stops, Sick Flexi safety controller
- Can tow up to 1,200 kg
- Natural navigation by laser scanner (odometric closed loop)
- map acquired automatically by the robot
- Positioning accuracy +/-10 mm and +/-1 deg
- turns on its own axis
- Wi-Fi 802.11a/b/g/n (2.4/5 GHz)
- Indoor use +5 to 35 C, 30-80% RH
- IP degree 13 (datasheet)
- Stainless steel (AISI 304) chassis
- complies with Machinery Directive and ISO 3691-4:2020
기술 사양
검증됨| 물리 사양 | |
| 무게 | 280 kg |
|---|---|
| 크기 | L 1.66 m × W 910 mm × H 275 mm |
| 가반하중 | 500 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 4.32 km/h |
| 작동 환경 | Indoor factories and warehouses (+5 to 35 C) |
| 전원 | |
| 배터리 지속 시간 | 600 min |
| 센싱 & 컴퓨팅 | |
| 센서 | Sick laser scanners (navigation and safety), sensitive safety edges |
| 연결성 | Wi-Fi 802.11a/b/g/n (2.4/5 GHz) |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 280 kg |
|---|---|
| 크기 | L 1.66 m × W 910 mm × H 275 mm |
| 가반하중 | 500 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 4.32 km/h |
| 작동 환경 | Indoor factories and warehouses (+5 to 35 C) |
| 전원 | |
| 배터리 지속 시간 | 600 min |
| 센싱 & 컴퓨팅 | |
| 센서 | Sick laser scanners (navigation and safety), sensitive safety edges |
| 연결성 | Wi-Fi 802.11a/b/g/n (2.4/5 GHz) |
이미지


이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the ECART 7 / ECART 10?
ECART 7 / ECART 10 is a model in Oppent's ECART family of autonomous mobile robots, built in Italy. Four driven wheels make it omnidirectional, and besides lifting 500 kg (700 kg maximum) it can tow up to 1,200 kg.
Who makes the ECART 7 / ECART 10?
The ECART 7 / ECART 10 is made by Oppent, a robotics company based in Italy.
How much does the ECART 7 / ECART 10 cost?
Oppent has not publicly announced pricing for the ECART 7 / ECART 10. You can enquire through RobotAIGeek for current pricing.
What is the ECART 7 / ECART 10 used for?
The ECART 7 / ECART 10 is designed for 사내 물류, 자재 취급, 운반, and intralogistics. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the ECART 7 / ECART 10?
The ECART 7 / ECART 10 has a payload capacity of 500 kg.
How much does the ECART 7 / ECART 10 weigh?
The ECART 7 / ECART 10 weighs 280 kg.
How fast is the ECART 7 / ECART 10?
The ECART 7 / ECART 10 can move at speeds of up to 4.32 km/h.
What is the battery life of the ECART 7 / ECART 10?
The ECART 7 / ECART 10 runs for about 600 minutes on a charge.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- ECART 7 / ECART 10 vs Wonik Robotics WR1000LF
- ECART 7 / ECART 10 vs L2 & L4 Low
- ECART 7 / ECART 10 vs Sekisyu CRAWLER
- ECART 7 / ECART 10 vs C060F
- ECART 7 / ECART 10 vs M060D






