★아직 평가 없음

Cyngn DriveMod Tugger

Mobile-RobotsUnited StatesUnited States출시됨
Cyngn DriveMod Tugger
비교
출처:
용도:
가격:
미공개

설명

Cyngn DriveMod Tugger은(는) Cyngn의 Mobile-Robots입니다. 운반 용도로 설계되었습니다. 주요 수치: 가동 시간 480분, 가반 하중 226.8 kg.

The DriveMod Tugger is Cyngn's autonomous tugger for industrial hauling: a Motrec heavy-duty tugger converted into a self-driving vehicle by Cyngn's DriveMod autonomy stack. Cyngn does not build the chassis — it partners with Motrec, an established industrial vehicle manufacturer, and integrates DriveMod into their fleet. The practical argument for it is that it needs nothing added to the building. There are no magnetic strips to lay and no special infrastructure to install, so deployment is a matter of days rather than a facility retrofit. It tows up to 12,000 lb of carts at 4.5 mph autonomously, turns inside a 57-inch radius and works aisles as narrow as 55 inches, running about eight hours on a 48 V battery. It can be switched to manual mode and driven by a person whenever that is easier. Safety is layered rather than single-point: 360° 3D lidar tracks pedestrians and predicts their movement, a virtual bumper handles collision avoidance, colour-coded LEDs signal the vehicle's intent, audio cues mark turning and arrival, and multiple on-vehicle e-stops are within reach. Fleets are directed three ways — from the on-vehicle display, from the cloud Fleet Management System for mission planning, or from tablets mounted around the facility that work like elevator call buttons. Missions run programmable skills including auto-unhitch.

주요 기능

  • Motrec heavy-duty tugger converted by Cyngn's DriveMod autonomy stack
  • Tows up to 12,000 lb (approx. 5,443 kg)
  • On-board load capacity 500 lb (approx. 227 kg)
  • 4.5 mph autonomous, 6 mph under manual control
  • 57 in turning radius
  • Operates in aisles as narrow as 55 in
  • 48 V battery with about 8 hours runtime
  • Charges in 2.5-4 hours on lithium, 8-10 hours standard
  • All-steel unibody construction
  • Requires no magnetic strips or special facility infrastructure
  • 360-degree 3D lidar with pedestrian tracking and movement prediction
  • Virtual Bumper collision avoidance
  • Colour-coded LED status lights and automated audio cues
  • Multiple on-vehicle emergency stop buttons
  • Switchable to manual mode for human driving
  • Programmable mission skills including auto-unhitch
  • Controlled from on-vehicle display, cloud Fleet Management System or facility tablets
  • 802.11 Wi-Fi with Ethernet port for data offload

기술 사양

검증됨
물리 사양
가반하중226.8 kg
이동성
이동 방식바퀴형
속도7.24 km/h
전원
배터리 지속 시간480 min
충전 시간2.5-4 hrs (lithium), 8-10 hrs (standard)
센싱 & 컴퓨팅
센서360-degree 3D lidar
연결성802.11 Wi-Fi; Ethernet port for data offload
소프트웨어 / AICyngn DriveMod autonomy stack with cloud Fleet Management System (FMS)
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Cyngn DriveMod Tugger?

The DriveMod Tugger is Cyngn's autonomous tugger for industrial hauling: a Motrec heavy-duty tugger converted into a self-driving vehicle by Cyngn's DriveMod autonomy stack.

Who makes the Cyngn DriveMod Tugger?

The Cyngn DriveMod Tugger is made by Cyngn, a robotics company based in United States.

How much does the Cyngn DriveMod Tugger cost?

Cyngn has not publicly announced pricing for the Cyngn DriveMod Tugger. You can enquire through RobotAIGeek for current pricing.

What is the Cyngn DriveMod Tugger used for?

The Cyngn DriveMod Tugger is designed for 운반. It is used in 창고·물류 and 제조 settings.

What is the payload capacity of the Cyngn DriveMod Tugger?

The Cyngn DriveMod Tugger has a payload capacity of 226.8 kg.

How fast is the Cyngn DriveMod Tugger?

The Cyngn DriveMod Tugger can move at speeds of up to 7.24 km/h.

What is the battery life of the Cyngn DriveMod Tugger?

The Cyngn DriveMod Tugger runs for about 480 minutes on a charge. It takes 2.5-4 hrs (lithium), 8-10 hrs (standard) to charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Cyngn DriveMod Tugger 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?