설명
CX35은(는) MAXAGV의 Industrial-Robot입니다. 사내 물류, 자재 취급, 운반 용도로 설계되었습니다. 주요 수치: 가반 하중 3000 kg.
The CX35 Narrow Passage is a shuttle carrier that drives underneath its load, lifts it and moves it between industrial processes or the warehouse. A dual drive, dual steer (DDDS) layout lets it carry heavy loads of up to 3,000 kg through tight corners.\nLike all MAXAGV vehicles it navigates mainly by laser, carries a personal-safety system of emergency stops, safety laser scanners, side edges and bumpers to ISO 3691-4:2020, and runs under the Max software platform with opportunity charging when idle. Options include barcode and RFID readers and MAXAGV's DeZone and Blue Point accessories.
주요 기능
- Under-ride lifting shuttle for containers, stillages and skids
- Dual Drive-Dual Steer (DDDS) for tight corners
- Unit load: Container - Stillage - Skid
- Maximum weight: 3000 kg
- Transfer/lift height: 400 - 900 mm
- Battery: Wet lead-acid, gel or lithium-ion
- Charging: Opportunity charging, fast charge or battery exchange
- Options: barcode scanner - RFID - DeZone - Blue Point
- Laser navigation as standard
- magnetic, optical or wire guidance where required
- Personal safety system: emergency stops, front/rear safety laser scanners, side edges and bumpers
- ISO 3691-4:2020
- Sonix on-board controller
- managed by the Max software platform
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 3000 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor production, warehouses and distribution centres |
| 센싱 & 컴퓨팅 | |
| 센서 | safety laser scanners, navigation laser, bumpers and safety edges |
| 연결성 | Max software platform (fleet control) |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 3000 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor production, warehouses and distribution centres |
| 센싱 & 컴퓨팅 | |
| 센서 | safety laser scanners, navigation laser, bumpers and safety edges |
| 연결성 | Max software platform (fleet control) |
이미지
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the CX35?
The CX35 Narrow Passage is a shuttle carrier that drives underneath its load, lifts it and moves it between industrial processes or the warehouse.
Who makes the CX35?
The CX35 is made by MAXAGV, a robotics company based in Sweden.
How much does the CX35 cost?
MAXAGV has not publicly announced pricing for the CX35. You can enquire through RobotAIGeek for current pricing.
What is the CX35 used for?
The CX35 is designed for 사내 물류, 자재 취급, 운반, and intralogistics. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the CX35?
The CX35 has a payload capacity of 3,000 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- CX35 vs iSAGEBOT Forklift Robot
- CX35 vs Grenzebach OL1200S
- CX35 vs Transport Series Forklift Robot (FMR)
- CX35 vs Stacker Series Forklift Robot (FMR)
- CX35 vs Reach Truck Series Forklift Robot (FMR)
