설명
The CRP-RH14-10-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production. It carries a 10 kg payload to a maximum reach of 1454 mm and repeats to +/-0.08 mm, with a 170 kg body that mounts either on the ground or inverted from a frame. The arm is built around welding rather than adapted to it: the J4 and J6 axes are hollow so a hollow welding gun can pass through them, the user signal line, gas pipe and welding cable are routed inside the casting for a smooth snag-free body, and the first two axes carry dust covers with a fully surrounded torch. CRP rates it Body IP54, wrist IP67 and specifies an operating range of 0~45°C. The robot ships with CRP's own controller cabinet and is sold alongside the company's positioners for coordinated multi-axis welding cells.
주요 기능
- With large working space, fast running speed and high repeated positioning accuracy, it is suitable for wide range of welding applications
- The safety emergency stop board independent of the control system is equipped with, and the safety relay circuit is adopted to provide double-circuit emergency stop to ensure the reliability of emergency stop
- The robot body adopts highly flexible special cable
- Built-in three-phase transformer makes 380V and 220V isolated to help the power supply more stable. Built-in three-phase filter can effectively improve the performance of EMC and EMI
- The robot body is with dual-circuit gas pipe to meet the welding demand
- The inner diameter of 6-axis middle hole is 44mm, it can meet the installation requirements of water-cooling torch and bellows torch
- Highly flexible welding cable is built-in
- The arm span is 1.4 meters. The design is highly compact and can be flexibly installed on the ground or upside down
기술 사양
검증됨| 물리 사양 | |
| 무게 | 170 kg |
|---|---|
| 가반하중 | 10 kg |
| 도달거리 | 1.45 m |
| 반복 정밀도 | ±0.08 mm |
| 소재 | Cast aluminium alloy |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Body IP54, wrist IP67 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G |
기술 사양
검증됨| 물리 사양 | |
| 무게 | 170 kg |
|---|---|
| 가반하중 | 10 kg |
| 도달거리 | 1.45 m |
| 반복 정밀도 | ±0.08 mm |
| 소재 | Cast aluminium alloy |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Body IP54, wrist IP67 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G |
이미지
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the CRP-RH14-10-W?
The CRP-RH14-10-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production.
Who makes the CRP-RH14-10-W?
The CRP-RH14-10-W is made by Chengdu CRP Robot Technology, a robotics company based in China.
How much does the CRP-RH14-10-W cost?
Chengdu CRP Robot Technology has not publicly announced pricing for the CRP-RH14-10-W. You can enquire through RobotAIGeek for current pricing.
What is the CRP-RH14-10-W used for?
The CRP-RH14-10-W is designed for 조립, 범용 자동화, 자재 취급, and 용접. It is used in 자동차, 전자, 에너지, and 제조 settings.
What is the payload capacity of the CRP-RH14-10-W?
The CRP-RH14-10-W has a payload capacity of 10 kg and a reach of 1.45 m.
How much does the CRP-RH14-10-W weigh?
The CRP-RH14-10-W weighs 170 kg.
How many degrees of freedom does the CRP-RH14-10-W have?
The CRP-RH14-10-W has 6 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- CRP-RH14-10-W vs Welding robot KW1012B-2010
- CRP-RH14-10-W vs Robot welding KW1010B-1440
- CRP-RH14-10-W vs UniBot iR18-1000
- CRP-RH14-10-W vs Neuromeka Indy12 V3
- CRP-RH14-10-W vs Neuromeka NURI7c