説明
The CRP-RH14-10-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production. It carries a 10 kg payload to a maximum reach of 1454 mm and repeats to +/-0.08 mm, with a 170 kg body that mounts either on the ground or inverted from a frame. The arm is built around welding rather than adapted to it: the J4 and J6 axes are hollow so a hollow welding gun can pass through them, the user signal line, gas pipe and welding cable are routed inside the casting for a smooth snag-free body, and the first two axes carry dust covers with a fully surrounded torch. CRP rates it Body IP54, wrist IP67 and specifies an operating range of 0~45°C. The robot ships with CRP's own controller cabinet and is sold alongside the company's positioners for coordinated multi-axis welding cells.
特長
- With large working space, fast running speed and high repeated positioning accuracy, it is suitable for wide range of welding applications
- The safety emergency stop board independent of the control system is equipped with, and the safety relay circuit is adopted to provide double-circuit emergency stop to ensure the reliability of emergency stop
- The robot body adopts highly flexible special cable
- Built-in three-phase transformer makes 380V and 220V isolated to help the power supply more stable. Built-in three-phase filter can effectively improve the performance of EMC and EMI
- The robot body is with dual-circuit gas pipe to meet the welding demand
- The inner diameter of 6-axis middle hole is 44mm, it can meet the installation requirements of water-cooling torch and bellows torch
- Highly flexible welding cable is built-in
- The arm span is 1.4 meters. The design is highly compact and can be flexibly installed on the ground or upside down
技術仕様
検証済み| 本体 | |
| 重量 | 170 kg |
|---|---|
| 可搬重量 | 10 kg |
| リーチ | 1.45 m |
| 繰り返し精度 | ±0.08 mm |
| 材質 | Cast aluminium alloy |
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 6 |
| 使用環境 | Body IP54, wrist IP67 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G |
技術仕様
検証済み| 本体 | |
| 重量 | 170 kg |
|---|---|
| 可搬重量 | 10 kg |
| リーチ | 1.45 m |
| 繰り返し精度 | ±0.08 mm |
| 材質 | Cast aluminium alloy |
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 6 |
| 使用環境 | Body IP54, wrist IP67 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G |
画像
martti
martti投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the CRP-RH14-10-W?
The CRP-RH14-10-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production.
Who makes the CRP-RH14-10-W?
The CRP-RH14-10-W is made by Chengdu CRP Robot Technology, a robotics company based in China.
How much does the CRP-RH14-10-W cost?
Chengdu CRP Robot Technology has not publicly announced pricing for the CRP-RH14-10-W. You can enquire through RobotAIGeek for current pricing.
What is the CRP-RH14-10-W used for?
The CRP-RH14-10-W is designed for 組立, 汎用自動化, マテリアルハンドリング, and 溶接. It is used in 自動車, エレクトロニクス, エネルギー, and 製造 settings.
What is the payload capacity of the CRP-RH14-10-W?
The CRP-RH14-10-W has a payload capacity of 10 kg and a reach of 1.45 m.
How much does the CRP-RH14-10-W weigh?
The CRP-RH14-10-W weighs 170 kg.
How many degrees of freedom does the CRP-RH14-10-W have?
The CRP-RH14-10-W has 6 degrees of freedom.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- CRP-RH14-10-W vs Welding robot KW1012B-2010
- CRP-RH14-10-W vs Robot welding KW1010B-1440
- CRP-RH14-10-W vs UniBot iR18-1000
- CRP-RH14-10-W vs Neuromeka Indy12 V3
- CRP-RH14-10-W vs Neuromeka NURI7c