★아직 평가 없음

CASBOT W1

HumanoidChinaChina출시됨
CASBOT W1
비교
용도:
픽앤플레이스점검Industrial manufacturingintelligent warehousingretail terminalsintelligent inspectioneducation and scientific research
가격:
미공개

설명

CASBOT W1은(는) CASBOT의 Humanoid입니다. 픽앤플레이스, 점검, Industrial manufacturing 용도로 설계되었습니다. 주요 수치: 260 kg, 가동 시간 240분, 가반 하중 5 kg, 도달 범위 610 mm, 20 자유도.

The CASBOT W1 is the company's wheeled embodied humanoid, and its defining feature is a lifting column that takes it from 1.12 m to 2.1 m. That range is the point: a fixed-height wheeled manipulator can only work at one bench height, whereas the W1 covers a 0 to 2.1 m working envelope, reaching floor-level bins and high shelving from the same chassis. Its dual 7-degree-of-freedom arms span 2,040 mm including grippers and carry 5 kg each over a 610 mm working radius, with RGBD cameras at both wrists as well as in the head and chest. Twenty degrees of freedom in total spread across head, waist, chassis, lift column and arms. The end effectors are swappable — the standard 2-DoF gripper can be exchanged for a dexterous hand or suction cups through a standard structural and communications interface. It runs on an industrial PC with an i9 processor and a 4060 GPU, navigates on a two-wheel differential chassis at up to 1.2 m/s, charges itself autonomously, and carries an IP68 rating with 4 to 5 hours of endurance from a 48 V 25 Ah lithium iron phosphate pack.

주요 기능

  • Multi-stage lifting column taking overall height from 1.12 m retracted to 2.1 m extended, giving a 0 to 2.1 m working height from one chassis
  • 0.95 x 0.615 m footprint
  • approximately 260 kg
  • 20 total degrees of freedom: 2 in the head (yaw and pitch), 1 at the waist (pitch), 2 in the chassis, 1 in the lift column and 7 per arm
  • Dual 7-degree-of-freedom arms with a 2,040 mm span including grippers, 5 kg payload each and a 610 mm working radius
  • Swappable end effectors through a standard structural and communications interface, supporting grippers, dexterous hands and suction cups
  • standard 2-DoF gripper weighs 500 g with 15 N grip force
  • RGBD structured-light cameras at both wrists plus one in the head and one in the chest, with a head binocular camera and a head display
  • Expandable 360-degree spherical LiDAR at the abdomen
  • 820 x 620 x 290 mm chassis on a 2+4 wheel two-wheel differential drive reaching 1.2 m/s unloaded
  • Industrial PC with i9 processor and 4060 graphics for main and motion control, plus an RK3588 interaction unit
  • 48 V 25 Ah lithium iron phosphate battery, 2 hour charge, 4 to 5 hours endurance, with autonomous charging
  • IP68 protection
  • 5 to 40 degrees Celsius, 25-85% non-condensing humidity
  • WiFi, 4G, Bluetooth and 100 Mbit Ethernet
  • Powered by CASBOT Embodied Brain 2.0, a three-layer brain-cerebellum-body architecture, with CASBOT reporting adaptation to new tasks in 45 to 90 minutes
  • Alloy and engineering plastic construction
  • chest microphone line array, twin head speakers and chest and column lighting

기술 사양

검증됨
물리 사양
무게260 kg
크기L 615 mm × W 950 mm × H 2.1 m
가반하중5 kg
도달거리610 mm
이동성
이동 방식바퀴형
자유도20
속도4.32 km/h
조작 능력높음
작동 환경5 to 40 degrees Celsius, 25-85% relative humidity non-condensing; IP68
액추에이터Dual 7-degree-of-freedom arms on a single-axis lifting column over a two-wheel differential wheeled chassis; swappable 2-DoF gripper, dexterous hand or suction end effector
전원
배터리 지속 시간4-5 h
충전 시간2 h
센싱 & 컴퓨팅
센서RGBD structured-light cameras x2 at wrists, RGBD camera in head, RGBD camera in chest, binocular camera in head, expandable 360-degree spherical LiDAR, chest microphone line array
연결성WiFi, 4G, Bluetooth, 100 Mbit Ethernet
소프트웨어 / AICASBOT Embodied Brain 2.0 with a three-layer brain-cerebellum-body architecture; autonomous operation with auto-recharging
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the CASBOT W1?

The CASBOT W1 is the company's wheeled embodied humanoid, and its defining feature is a lifting column that takes it from 1.12 m to 2.1 m.

Who makes the CASBOT W1?

The CASBOT W1 is made by CASBOT, a robotics company based in China.

How much does the CASBOT W1 cost?

CASBOT has not publicly announced pricing for the CASBOT W1. You can enquire through RobotAIGeek for current pricing.

What is the CASBOT W1 used for?

The CASBOT W1 is designed for 픽앤플레이스, 점검, industrial manufacturing, and intelligent warehousing. It is used in 연구, 창고·물류, 제조, and 리테일 settings.

What is the payload capacity of the CASBOT W1?

The CASBOT W1 has a payload capacity of 5 kg and a reach of 610 mm.

How much does the CASBOT W1 weigh?

The CASBOT W1 weighs 260 kg.

How fast is the CASBOT W1?

The CASBOT W1 can move at speeds of up to 4.32 km/h.

What is the battery life of the CASBOT W1?

The CASBOT W1 runs for 4-5 h on a charge. It takes 2 h to charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

CASBOT W1 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?