설명
Astribot S1은(는) Astribot의 Humanoid입니다. 연구, 도우미, 교육 용도로 설계되었습니다. 주요 수치: 80 kg, 가동 시간 360분, 가반 하중 5 kg, 7 자유도, 2024년 출시.
The S1 is Astribot's bid to match a working adult rather than merely resemble one, and the company publishes its specification as a side-by-side with a normal adult male to make exactly that point. On the numbers that matter for manipulation it wins: an end effector that moves at 10 m/s or more against a human swing arm's 5 to 10, acceleration around 100 m/s2, and positioning repeatability of 0.1 mm where a person managed 1 to 5 mm even after training. It gives up ground on endurance - four to six hours against ten, though it supports running plugged in - and it is heavier, 80 kg against 70. Physically it is close to human scale: 170 cm tall against 173, with a 194 cm arm span that is notably wider than a person's 171 to 175. Each of its two arms has seven degrees of freedom and carries 5 kg at horizontal reach. It does not walk - the torso and arms sit on an omnidirectional wheeled base, which is what lets it hold that repeatability while moving. What Astribot argues sets it apart is the architecture rather than the joints. The company calls it Design for AI: hardware and software developed as one system so that learning and manipulation are coupled rather than bolted together, which it says is what let it break through on collecting embodied-intelligence training data. The robot is taught largely by teleoperation and imitation learning, using human tools and equipment rather than purpose-made fixtures.
주요 기능
- Seven degrees of freedom per arm, dual-arm configuration
- Payload 5 kg per arm at horizontal reach
- Maximum end-effector velocity 10 m/s or greater
- Maximum end-effector acceleration approximately 100 m/s2
- Positioning repeatability plus or minus 0.1 mm
- Height 170 cm
- weight 80 kg
- Arm span 194 cm
- Endurance 4 to 6 hours
- supports plugged-in operation
- Omnidirectional wheeled base rather than legs
- Design for AI (DFAI) integrated hardware and software architecture
- Teleoperation and imitation learning for skill acquisition
- Designed to use human tools and equipment
- Targeted at research, manipulation, and indoor service and assistance tasks
기술 사양
검증됨| 물리 사양 | |
| 무게 | 80 kg |
|---|---|
| 크기 | H 1.7 m |
| 가반하중 | 5 kg |
| 반복 정밀도 | ±0.1 mm |
| 이동성 | |
| 이동 방식 | 바퀴형, 휴머노이드 |
| 자유도 | 7 |
| 조작 능력 | 높음 |
| 작동 환경 | Indoor homes, workplaces and research settings, using human tools and equipment |
| 액추에이터 | Dual 7-DoF arms with a 194 cm span on an omnidirectional wheeled base; 0.1 mm repeatability at up to 10 m/s end-effector velocity |
| 전원 | |
| 배터리 지속 시간 | 6 hours |
| 충전 방식 | dock charging (dedicated docking station, ~1.5 hours charge time) |
| 센싱 & 컴퓨팅 | |
| 소프트웨어 / AI | Design for AI (DFAI) integrated hardware-software architecture; teleoperation and imitation learning |
동영상
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 80 kg |
|---|---|
| 크기 | H 1.7 m |
| 가반하중 | 5 kg |
| 반복 정밀도 | ±0.1 mm |
| 이동성 | |
| 이동 방식 | 바퀴형, 휴머노이드 |
| 자유도 | 7 |
| 조작 능력 | 높음 |
| 작동 환경 | Indoor homes, workplaces and research settings, using human tools and equipment |
| 액추에이터 | Dual 7-DoF arms with a 194 cm span on an omnidirectional wheeled base; 0.1 mm repeatability at up to 10 m/s end-effector velocity |
| 전원 | |
| 배터리 지속 시간 | 6 hours |
| 충전 방식 | dock charging (dedicated docking station, ~1.5 hours charge time) |
| 센싱 & 컴퓨팅 | |
| 소프트웨어 / AI | Design for AI (DFAI) integrated hardware-software architecture; teleoperation and imitation learning |
이미지






이미지 기여
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Astribot S1?
The S1 is Astribot's bid to match a working adult rather than merely resemble one, and the company publishes its specification as a side-by-side with a normal adult male to make exactly that point.
Who makes the Astribot S1?
The Astribot S1 is made by Astribot, a robotics company based in China.
How much does the Astribot S1 cost?
Astribot has not publicly announced pricing for the Astribot S1. You can enquire through RobotAIGeek for current pricing.
What is the Astribot S1 used for?
The Astribot S1 is designed for 연구, 도우미, and 교육. It is used in 연구 and 가정 settings.
What is the payload capacity of the Astribot S1?
The Astribot S1 has a payload capacity of 5 kg.
How much does the Astribot S1 weigh?
The Astribot S1 weighs 80 kg.
What is the battery life of the Astribot S1?
The Astribot S1 runs for 6 hours on a charge.
How many degrees of freedom does the Astribot S1 have?
The Astribot S1 has 7 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Astribot S1 vs KUAVO 5 / 5-W
- Astribot S1 vs Noetix N2
- Astribot S1 vs Oli
- Astribot S1 vs RAISE A1
- Astribot S1 vs Cloud Ginger 2.0













