Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot


説明
Shenhao L2 Pro Indoor Lifting Wheel Inspection RobotはShenhao TechnologyのMobile-Robotsです。 点検、モニタリング、Indoor switch room and distribution room inspection向けに設計されています。 主な数値:65 kg、稼働時間 300 分。
The L2 Pro, factory-coded F200, solves an indoor problem: instruments and displays sit at wildly different heights in a switch room, and a fixed camera height means half of them are read badly. Its answer is a two-stage track-type lifting module on a self-balancing suspension chassis — the mast travels fast over a large stroke to put the gimbal at the right height, while the suspension keeps the vehicle stable enough that the image is usable while it does. Chassis and lift are controlled together based on ground, environment and task rather than independently. It carries visible light, infrared, sound, gas and temperature-humidity sensing, and its gas set covers CO, H2S and CH4. At 65 kg it walks at 1.2 m/s, stops within half a metre from 1 m/s, turns in place on two-wheel differential steering, and can drive lifts and access control to move between floors.
特長
- Self-balancing suspension motion chassis with a two-stage track-type lifting module, fast with a large stroke
- Robot weight up to 65 kg
- Maximum walking speed of 1.2 m/s or more, braking distance 0.5 m or less from 1 m/s
- Two-wheel differential steering with rotation in place
- Navigation positioning accuracy ±20 mm
- Battery life of 5 hours or more
- Ambient temperature -5 to 50 degrees Celsius
- relative humidity 5% to 90% non-condensing
- Visible light inspection, infrared temperature measurement, environmental and gas monitoring
- Gas detection covering CO, H2S and CH4
- Noise detection: omnidirectional, sensitivity -24 dB, signal-to-noise ratio 60 dB
- Environmental temperature and humidity collection
- Elevator control and access control linkage for multi-floor working
- Safety: emergency stop, collision prevention, obstacle avoidance and avoidance, and pit protection
- Intelligent joint motion control of chassis and lifting module based on ground, environment and task
技術仕様
検証済み| 本体 | |
| 重量 | 65 kg |
|---|---|
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 4.32 km/h |
| 使用環境 | Indoor switch rooms and distribution rooms; -5 to 50 degrees Celsius; 5-90% RH non-condensing |
| アクチュエーター | Self-balancing suspension wheeled chassis with a two-stage track-type lifting mast |
| 電源 | |
| バッテリー駆動時間 | ≥5 h |
| センシング・演算 | |
| センサー | visible light camera, infrared thermal imager, omnidirectional microphone, CO, H2S and CH4 gas sensors, temperature and humidity sensor |
| ソフトウェア / AI | Intelligent joint motion control of chassis and lift; data upload to the robot platform for visualisation and analysis |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 65 kg |
|---|---|
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 4.32 km/h |
| 使用環境 | Indoor switch rooms and distribution rooms; -5 to 50 degrees Celsius; 5-90% RH non-condensing |
| アクチュエーター | Self-balancing suspension wheeled chassis with a two-stage track-type lifting mast |
| 電源 | |
| バッテリー駆動時間 | ≥5 h |
| センシング・演算 | |
| センサー | visible light camera, infrared thermal imager, omnidirectional microphone, CO, H2S and CH4 gas sensors, temperature and humidity sensor |
| ソフトウェア / AI | Intelligent joint motion control of chassis and lift; data upload to the robot platform for visualisation and analysis |
画像

投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot?
The L2 Pro, factory-coded F200, solves an indoor problem: instruments and displays sit at wildly different heights in a switch room, and a fixed camera height means half of them are read badly.
Who makes the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot?
The Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot is made by Shenhao Technology, a robotics company based in China.
How much does the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot cost?
Shenhao Technology has not publicly announced pricing for the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot. You can enquire through RobotAIGeek for current pricing.
What is the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot used for?
The Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot is designed for 点検, モニタリング, indoor switch room and distribution room inspection, and multi-height instrument and display reading. It is used in エネルギー, 製造, and 警備・パトロール settings.
How much does the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot weigh?
The Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot weighs 65 kg.
How fast is the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot?
The Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot can move at speeds of up to 4.32 km/h.
What is the battery life of the Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot?
The Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot runs for ≥5 h on a charge.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot vs Guoxing RXR-MC80BD
- Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot vs Guoxing RXR-C6BD
- Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot vs Guoxing RXR-M80D-13KT
- Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot vs Guoxing RXR-M40D-11KT
- Shenhao L2 Pro Indoor Lifting Wheel Inspection Robot vs Guoxing XH1000




