説明
HOPEJrはThe Robot StudioのEducational-Robotsです。 マニピュレーション、研究、リモート向けに設計されています。
HOPEJr is an open-source DIY humanoid robot with dexterous hands designed by The Robot Studio, which publishes its plans and instructions on GitHub so that a community can build low-cost humanoids from 3D-printed parts and off-the-shelf servos. The design's top constraint is low cost and a small bill of materials while keeping adequate function, on the bet that AI control can make up for compliant, lower-cost hardware that is also safer to use around people. The repository has two strands. The humanoid strand holds a full-body design with arms, torso and leg structures, URDF models for simulation and an update for Robstride 02 motors. The arm strand, released in drafts from October 2024 and reworked with Hugging Face in 2025, is the most developed: a tendon-driven hand with an extra underactuated joint at each fingertip, an opposable thumb and rolling-contact finger joints, driven by 16 small Feetech servos, on an arm with seven larger Feetech servos. Custom PCBs mean no soldering is needed, and a matching exoskeleton teleoperation device with hall-effect joint encoders maps the operator's arm and hand to the robot one to one. HOPEJr is integrated with Hugging Face's LeRobot library for recording, training and inference. The Robot Studio sells no HOPEJr hardware; builders source the components from the published bill of materials.
特長
- Open-source DIY humanoid robot design with dexterous hands
- Full-body humanoid design with arms, torso and legs
- URDF models for simulation
- Robstride 02 motor update for the humanoid body
- Arm and hand released in drafts from October 2024, reworked with Hugging Face in 2025
- Tendon-driven fingers with an extra underactuated fingertip joint
- opposable thumb
- Hand: 16 Feetech SCS0009 servos
- arm: 7 Feetech servos (STS3250, STS3215 12 V, SM8512BL)
- No soldering: custom PCBs connect the motors
- Exoskeleton teleoperation device with hall-effect encoders, 1:1 joint mapping
- Integrated with the LeRobot library for recording, training and inference
- Plans, STL/STEP files and bill of materials published
- no hardware sold by The Robot Studio
技術仕様
| 本体 | |
| 材質 | 3D-printed parts, Feetech servos, fishing-line tendons, PTFE tubes |
|---|---|
| 移動性能 | |
| 移動方式 | ヒューマノイド |
| 使用環境 | Workshops, labs and homes of hobbyist builders |
| センシング・演算 | |
| ソフトウェア / AI | Hugging Face LeRobot (open source) |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
| 本体 | |
| 材質 | 3D-printed parts, Feetech servos, fishing-line tendons, PTFE tubes |
|---|---|
| 移動性能 | |
| 移動方式 | ヒューマノイド |
| 使用環境 | Workshops, labs and homes of hobbyist builders |
| センシング・演算 | |
| ソフトウェア / AI | Hugging Face LeRobot (open source) |
画像

投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the HOPEJr?
HOPEJr is an open-source DIY humanoid robot with dexterous hands designed by The Robot Studio, which publishes its plans and instructions on GitHub so that a community can build low-cost humanoids from 3D-printed parts and off-the-shelf servos.
Who makes the HOPEJr?
The HOPEJr is made by The Robot Studio, a robotics company based in France.
How much does the HOPEJr cost?
The Robot Studio has not publicly announced pricing for the HOPEJr. You can enquire through RobotAIGeek for current pricing.
What is the HOPEJr used for?
The HOPEJr is designed for マニピュレーション, 研究, リモート, and 教育. It is used in 研究 and 教育 settings.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- HOPEJr vs Lanxin H6 Standard
- HOPEJr vs InMoov
- HOPEJr vs Red Rabbit Robotics RX1
- HOPEJr vs Nino
- HOPEJr vs Robovie-Z





