説明
boat-botはGCtronicのEducational-Robotsです。 データ収集、研究、モニタリング向けに設計されています。 主な数値:2 kg、価格 1,500 CHF、2020年発売。
The boat-bot is GCtronic's small unmanned surface vehicle for research and education on the water, a compact catamaran of about 40 cm and 2 kg announced in February 2020. It grew out of GCtronic's work on smart sailing marks and is built as an open platform with all the components needed to make an autonomous boat. A Raspberry Pi Zero WH running Raspbian is its control core, interfacing a u-blox GPS, a 9-axis IMU with sensor fusion, an Arduino companion chip and two protected brushless thrusters with ESCs. It connects by WiFi and Bluetooth, with LoRa or GSM optional, and has a speaker, buttons, LEDs and open GPIO; a 4-cell 14.4 V LiPo of more than 60 Wh with voltage and current monitoring powers it. Uses include a training field buoy, measurements on the water and a smart surface marker buoy.
特長
- Catamaran, about 40 cm, 2 kg
- Raspberry Pi Zero WH, Raspbian
- u-blox GPS, 9-axis IMU with fusion
- Arduino companion chip
- 2 protected brushless thrusters with ESCs
- 4S 14.4 V LiPo, over 60 Wh, battery monitoring
- WiFi and Bluetooth 4
- optional LoRa or GSM
- Speaker, buttons, LEDs, open GPIO
技術仕様
検証済み| 本体 | |
| 重量 | 2 kg |
|---|---|
| 寸法 | L 400 mm × W 400 mm |
| 移動性能 | |
| 移動方式 | 水中型 |
| 使用環境 | Outdoor lakes, sea and other water surfaces |
| センシング・演算 | |
| センサー | u-blox GPS; 9-axis IMU with sensor fusion; battery voltage and current monitoring |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 2 kg |
|---|---|
| 寸法 | L 400 mm × W 400 mm |
| 移動性能 | |
| 移動方式 | 水中型 |
| 使用環境 | Outdoor lakes, sea and other water surfaces |
| センシング・演算 | |
| センサー | u-blox GPS; 9-axis IMU with sensor fusion; battery voltage and current monitoring |
画像





投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the boat-bot?
The boat-bot is GCtronic's small unmanned surface vehicle for research and education on the water, a compact catamaran of about 40 cm and 2 kg announced in February 2020. It grew out of GCtronic's work on smart sailing marks and is built as an open platform with all the components needed to make an autonomous boat.
Who makes the boat-bot?
The boat-bot is made by GCtronic, a robotics company based in Switzerland.
How much does the boat-bot cost?
The boat-bot is priced at around 1,500 CHF.
What is the boat-bot used for?
The boat-bot is designed for データ収集, 研究, モニタリング, and 教育. It is used in 研究 and 教育 settings.
How much does the boat-bot weigh?
The boat-bot weighs 2 kg.
When was the boat-bot released?
The boat-bot was released in 2020.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- boat-bot vs ROBOLAB-EDU
- boat-bot vs onero Robotic Arm A1
- boat-bot vs e-puck2
- boat-bot vs KHR-3HV Ver.3.1 (22-Axis Version)
- boat-bot vs KHR-3HV Ver.3.1 LiFe Battery Set









