BESCHREIBUNG
YUNJI UP C40 is Yunji Technology's commercial floor-cleaning robot, and the pitch behind it is consolidation rather than autonomy alone: one machine that scrubs, sweeps, dust mops and vacuums, so a site does not have to buy, train on and maintain four separate devices. Switching between the four modes is a one-touch operation. It is a compact machine — 650 x 520 x 720 mm and roughly 110 kg — carrying a 16 L clean-water tank and a 1.5 L debris bin, with a 650 mm minimum turning radius that lets it work the aisles and corridors of shopping centres, supermarkets, offices, hotels and workshops. Yunji recommends it for areas below about 10,000 m2; larger sites are expected to run several units or step up to the UP C60. Navigation combines camera, ultrasonic sensors and radar for localisation and dynamic obstacle avoidance in spaces where people are moving. Two behaviours matter for unattended running: breakpoint resume, which returns the robot to where it stopped rather than restarting a task, and missed-area recleaning, which comes back to sections that were blocked when it first passed. An automatic service station handles charging, clean-water refill and wastewater drainage, and the robot returns to it on its own when the battery or clean water drops to about 10% or the wastewater tank fills — which is what makes 24/7 operation practical where the site allows it. It runs offline as well as connected: cleaning tasks and local app control work without Wi-Fi or a 4G SIM, while remote operation and log downloads need a network. Connected deployments add elevator and IoT integration for multi-floor work and a cloud management platform that turns cleaning records into coverage and utilisation reporting. The operating system and app platform are Android. The limits are stated plainly by the maker. Scrubbing is not suitable for carpet, cleaning on slopes is not supported (the robot may travel unloaded on gradients up to 8 degrees), and it is not designed for heavy oil contamination, scratch or tyre-mark removal, or sweeping oversized debris such as bottles, cardboard and large plant matter.
FUNKTIONEN
- 4-in-1 cleaning: scrub, sweep, dust mop and vacuum with one-touch mode switching
- Dimensions 650 x 520 x 720 mm (L x W x H)
- minimum turning radius 650 mm
- Weight approximately 110 kg
- Clean-water tank 16 L
- debris bin 1.5 L
- Recommended application area below 10,000 m2 for typical deployments
- Navigation by camera, ultrasonic sensors and radar with dynamic obstacle avoidance
- Breakpoint resume: unfinished work is picked up where it stopped
- Missed-area recleaning returns to sections blocked on the first pass
- Automatic service station for charging, clean-water refill and wastewater drainage
- Automatic return thresholds: battery 10%, clean water 10%, wastewater tank 100%
- Offline cleaning and local app control supported without Wi-Fi or a 4G SIM
- Remote operation and log download require a network connection
- Elevator and IoT integration for continuous multi-floor operation
- Cloud management platform for fault alerts, reporting, user management and task scheduling
- Remote mapping and task setup without manually pushing the robot around the site
- 24/7 cleaning capability and night operation where the environment allows
- High-pressure water gun for manual spot work
- Operating system and app platform: Android
- Maximum unloaded travel slope 8 degrees
- cleaning on slopes is not supported
- Handles wet stains and dry debris including leaves, nutshells, paper scraps, screws, tea leaves, coffee grounds, cigarette butts and hair
TECHNISCHE DATEN
| Physisch | |
| Gewicht | 110 kg |
|---|---|
| Abmessungen | L 650 mm × W 520 mm × H 720 mm |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Manipulation | Niedrig |
| Einsatzumgebung | Indoor commercial and light-industrial floors: shopping centres, supermarkets, office buildings, hotels, transport hubs, hospitals, residential property, stadiums and factory workshops. Not for carpet scrubbing or cleaning on slopes. |
| Aktoren | Wheeled cleaning chassis with scrubbing roller brush, sweeping, dust-mop and vacuum modules; 650 mm minimum turning radius |
| Sensorik & Rechenleistung | |
| Sensoren | camera, ultrasonic sensors, radar |
| Software / KI | Android-based operating system and app platform; local app control offline; remote mapping, task setup, log download and fleet reporting through Yunji's cloud management platform; open API/SDK and configuration management noted in the full-stack software architecture |
TECHNISCHE DATEN
| Physisch | |
| Gewicht | 110 kg |
|---|---|
| Abmessungen | L 650 mm × W 520 mm × H 720 mm |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Manipulation | Niedrig |
| Einsatzumgebung | Indoor commercial and light-industrial floors: shopping centres, supermarkets, office buildings, hotels, transport hubs, hospitals, residential property, stadiums and factory workshops. Not for carpet scrubbing or cleaning on slopes. |
| Aktoren | Wheeled cleaning chassis with scrubbing roller brush, sweeping, dust-mop and vacuum modules; 650 mm minimum turning radius |
| Sensorik & Rechenleistung | |
| Sensoren | camera, ultrasonic sensors, radar |
| Software / KI | Android-based operating system and app platform; local app control offline; remote mapping, task setup, log download and fleet reporting through Yunji's cloud management platform; open API/SDK and configuration management noted in the full-stack software architecture |
Bilder





Bildbeiträge
Videos
ROBOTER-FOREN
Foren werden geladen...
BEWERTUNGEN
HÄUFIG GESTELLTE FRAGEN
What is the YUNJI UP C40?
YUNJI UP C40 is Yunji Technology's commercial floor-cleaning robot, and the pitch behind it is consolidation rather than autonomy alone: one machine that scrubs, sweeps, dust mops and vacuums, so a site does not have to buy, train on and maintain four separate devices.
Who makes the YUNJI UP C40?
The YUNJI UP C40 is made by Yunji Technology, a robotics company based in China.
How much does the YUNJI UP C40 cost?
Yunji Technology has not publicly announced pricing for the YUNJI UP C40. You can enquire through RobotAIGeek for current pricing.
What is the YUNJI UP C40 used for?
The YUNJI UP C40 is designed for reinigung. It is used in reinigung & gebäudemanagement, gesundheitswesen, hotellerie, and fertigung settings.
How much does the YUNJI UP C40 weigh?
The YUNJI UP C40 weighs 110 kg.
MIT ÄHNLICHEN ROBOTERN VERGLEICHEN
Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt
- YUNJI UP C40 vs Sunburst UV Bot
- YUNJI UP C40 vs ECOVACS DEEBOT PRO M1 3D
- YUNJI UP C40 vs Maytronics Dolphin Wave 60
- YUNJI UP C40 vs Maytronics Dolphin Wave 80
- YUNJI UP C40 vs Maytronics Dolphin Wave 90i





