BESCHREIBUNG
DYNO ATMAN ist ein Mobile-Robots von RobotoAI Technologies. Er ist für Schwerlasttransport, Intralogistik, Materialhandhabung ausgelegt. Eckdaten: 480 min Laufzeit, 1000 kg Traglast.
DYNO ATMAN is a series of autonomous mobile robots (AMRs) made by RobotoAI Technologies in Coimbatore for carrying loads inside factories and warehouses. The low, flat-topped robots drive under or carry racks, carts, pallets and fixtures, and the range spans the 100 kg AT100, the 250 kg AT250, the 650 kg AT650 and the 1,000 kg HAT1000. All models navigate with two 2D laser scanners giving 360-degree protection and a front AI depth camera, turn on the spot, and reach a stated positioning accuracy of plus or minus 2 mm at docking points. They run on 48 V lithium iron phosphate batteries for 8 to 10 hours, recharge in 2 to 3 hours by auto-dock or manual charging (battery swapping optional on the larger models), connect over dual-band Wi-Fi and exchange signals with a factory PLC through 4 digital inputs and outputs. Top speed ranges from 1.5 m/s on the AT100 to 1.1 m/s on the AT650 and HAT1000, and all are rated IP52 for indoor use. RobotoAI targets bobbin and fabric-roll transport in textile mills, warehouse logistics, line-side delivery in automotive plants, energy facilities and heavy-component moves that would otherwise need a forklift.
FUNKTIONEN
- Series of autonomous mobile robots for indoor material handling
- AT100: payload 100 kg
- ~846 x 626 x 318 mm
- self weight ~90 kg
- max speed 1.5 m/s
- LFP 48 V 45 Ah
- AT250: payload 250 kg
- 960 x 600 x 320 mm
- self weight ~100-120 kg
- max speed 1.3 m/s
- LFP 48 V 60 Ah
- AT650: payload 650 kg
- 1300 x 900 x 320 mm
- self weight ~180 kg
- max speed 1.1 m/s
- LFP 48 V 90 Ah
- HAT1000: payload 1000 kg
- 1300 x 900 x 320 mm
- self weight ~200-230 kg
- max speed 1.1 m/s
- LFP 48 V 105 Ah
- Ground clearance 40 mm (all models)
- Zero turning radius
- Navigation accuracy +/-30 mm and +/-1 deg
- positioning accuracy +/-2 mm
- Maximum incline/decline 3 deg at 0.5 m/s
- Run time 8-10 hours
- Charging time 2-3 hours (AT100, AT250)
- 3 hours (AT650, HAT1000)
- Auto-dock or manual charging
- battery swapping optional on AT650 and HAT1000
- 3,000 charge cycles
- 2 x 2D laser scanners for 360-degree protection
- Front AI depth camera (rear optional)
- 4 proximity sensors optional
- RGB LED status indication
- Dual-band Wi-Fi (IEEE 802.11 a/b/g/n/ac, 2.4 and 5 GHz)
- 4 digital inputs and 4 digital outputs for PLC interfacing
- IP52
- indoor use only
- 5-45 C, 20-95% RH non-condensing
- Drive components to EN/UL/CSA standards
- motor drivers with STO functional safety (SIL2, ISO 13849-1 PL d)
- Heavy-engineering text on the site cites payloads up to 1,500 kg (no HAT1500 datasheet published)
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Traglast | 1000 kg |
|---|---|
| Mobilität | |
| Bewegungsart | Radbasiert |
| Geschwindigkeit | 5.4 km/h |
| Einsatzumgebung | Indoor factory and warehouse floors, no water, dust or oil spillage, IP52, 5°C to 45°C |
| Energie | |
| Akkulaufzeit | 480 min |
| Sensorik & Rechenleistung | |
| Sensoren | 2 x 2D LiDAR laser scanners, AI depth camera (front; rear optional), Proximity sensors x 4 (optional) |
| Konnektivität | Dual-band Wi-Fi (802.11 a/b/g/n/ac); 4 DI / 4 DO for PLC |
ROBOTER-FOREN
Foren werden geladen...
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Traglast | 1000 kg |
|---|---|
| Mobilität | |
| Bewegungsart | Radbasiert |
| Geschwindigkeit | 5.4 km/h |
| Einsatzumgebung | Indoor factory and warehouse floors, no water, dust or oil spillage, IP52, 5°C to 45°C |
| Energie | |
| Akkulaufzeit | 480 min |
| Sensorik & Rechenleistung | |
| Sensoren | 2 x 2D LiDAR laser scanners, AI depth camera (front; rear optional), Proximity sensors x 4 (optional) |
| Konnektivität | Dual-band Wi-Fi (802.11 a/b/g/n/ac); 4 DI / 4 DO for PLC |
Bilder
martti
martti
martti
marttiBildbeiträge
Videos
ROBOTER-FOREN
Foren werden geladen...
BEWERTUNGEN
HÄUFIG GESTELLTE FRAGEN
What is the DYNO ATMAN?
DYNO ATMAN is a series of autonomous mobile robots (AMRs) made by RobotoAI Technologies in Coimbatore for carrying loads inside factories and warehouses.
Who makes the DYNO ATMAN?
The DYNO ATMAN is made by RobotoAI Technologies, a robotics company based in India.
How much does the DYNO ATMAN cost?
RobotoAI Technologies has not publicly announced pricing for the DYNO ATMAN. You can enquire through RobotAIGeek for current pricing.
What is the DYNO ATMAN used for?
The DYNO ATMAN is designed for schwerlasttransport, intralogistik, materialhandhabung, and palettentransport. It is used in automobilindustrie, energie, lager & logistik, and fertigung settings.
What is the payload capacity of the DYNO ATMAN?
The DYNO ATMAN has a payload capacity of 1,000 kg.
How fast is the DYNO ATMAN?
The DYNO ATMAN can move at speeds of up to 5.4 km/h.
What is the battery life of the DYNO ATMAN?
The DYNO ATMAN runs for about 480 minutes on a charge.
MIT ÄHNLICHEN ROBOTERN VERGLEICHEN
Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt
- DYNO ATMAN vs CHARIOT
- DYNO ATMAN vs FlexQube Board AGV
- DYNO ATMAN vs FlexQube Hanging AGV
- DYNO ATMAN vs FlexQube Mother AGV
- DYNO ATMAN vs FlexQube Mother-Daughter AGV
