RobotAIGeek
★Noch nicht bewertet

CRP-RH18-20-W

Chengdu CRP Robot Technology
Industrial-RobotChinaChinaVeröffentlicht
CRP-RH18-20-W
Vergleichen
Quellen:
crobotp-robot.com
Branchen:
AutomobilindustrieElektronikEnergieFertigung
Anwendungen:
MontageAllgemeine AutomatisierungMaterialhandhabungSchweißen
Preis:
Nicht angekündigt

BESCHREIBUNG

The CRP-RH18-20-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production. It carries a 20 kg payload to a maximum reach of 1730 mm and repeats to +/-0.08 mm, with a 285 kg body that mounts either on the ground or inverted from a frame. The arm is built around welding rather than adapted to it: the J4 and J6 axes are hollow so a hollow welding gun can pass through them, the user signal line, gas pipe and welding cable are routed inside the casting for a smooth snag-free body, and the first two axes carry dust covers with a fully surrounded torch. CRP rates it Body IP54, wrist IP67 and specifies an operating range of 0~45°C. The robot ships with CRP's own controller cabinet and is sold alongside the company's positioners for coordinated multi-axis welding cells.

FUNKTIONEN

  • The arm span is nearly 1.8 meters. The design is highly compact and can be flexibly installed on the ground or upside down
  • With large working space, fast running speed and high repeated positioning accuracy, it is suitable for wide range of welding applications
  • The safety emergency stop board independent of the control system is equipped with, and the safety relay circuit is adopted to provide double-circuit emergency stop to ensure the reliability of emergency stop
  • The robot body adopts highly flexible special cable
  • Built-in three-phase transformer makes 380V and 220V isolated to help the power supply more stable. Built-in three-phase filter can effectively improve the performance of EMC and EMI
  • The robot body is with dual-circuit gas pipe to meet the welding demand
  • The inner diameter of 6-axis middle hole is 44mm, it can meet the installation requirements of water-cooling torch and bellows torch
  • Highly flexible welding cable is built-in

TECHNISCHE DATEN

Verifiziert
Physisch
Gewicht285 kg
Traglast20 kg
Reichweite1.73 m
Wiederholgenauigkeit±0.08 mm
MaterialienCast aluminium alloy
Mobilität
BewegungsartStationär
Freiheitsgrade6
EinsatzumgebungBody IP54, wrist IP67 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

HÄUFIG GESTELLTE FRAGEN

What is the CRP-RH18-20-W?

The CRP-RH18-20-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production.

Who makes the CRP-RH18-20-W?

The CRP-RH18-20-W is made by Chengdu CRP Robot Technology, a robotics company based in China.

How much does the CRP-RH18-20-W cost?

Chengdu CRP Robot Technology has not publicly announced pricing for the CRP-RH18-20-W. You can enquire through RobotAIGeek for current pricing.

What is the CRP-RH18-20-W used for?

The CRP-RH18-20-W is designed for montage, allgemeine automatisierung, materialhandhabung, and schweißen. It is used in automobilindustrie, elektronik, energie, and fertigung settings.

What is the payload capacity of the CRP-RH18-20-W?

The CRP-RH18-20-W has a payload capacity of 20 kg and a reach of 1.73 m.

How much does the CRP-RH18-20-W weigh?

The CRP-RH18-20-W weighs 285 kg.

How many degrees of freedom does the CRP-RH18-20-W have?

The CRP-RH18-20-W has 6 degrees of freedom.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu CRP-RH18-20-W →

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?