描述
Type UA Abrasive Blasting Robot是Urakami Research & Development的Cleaning-Robots。 面向清潔、遠端設計。 關鍵數據:350 kg。
The Type UA is Urakami's remote-controlled abrasive blasting robot. Its main unit sticks to the wall, ceiling or floor of a structure by vacuum and drives itself along the surface while blast cleaning it, preparing steel ship hulls and bottoms, oil and water tanks, gas holders, concrete buildings and bridges, and nuclear plant surfaces for painting or inspection without scaffolding. Abrasive is recycled and dust is recovered through the vacuum, so the abrasive can be reused many times, costs fall and the work area stays clean enough for other trades to keep working. The strong vacuum leaves the blasted surface free of dust, and the robot copes with steel plate, weld beads, deep rust, curved and concrete surfaces. A ground support unit with the vacuum pump, an auto-tension winch on wire rope, an air compressor and a generator back the main unit, which an operator steers by remote control. It comes as the UA600, blasting a strip about 400 mm wide at up to 9 m/min, and the smaller UA400, with a corner version (UAC400) and a ship-bottom setup.
功能特色
- Vacuum adhesion on walls, ceilings and floors
- self-propelled
- Remote-controlled from the ground, no scaffolding
- Abrasive recycling and dust recovery system
- Clean, dust-free finished surface
- Works on steel plate, weld beads, deep rust, curved and concrete surfaces
- UA600: approx. 400 mm blasting width, up to 9 m/min, approx. 350 kgf
- UA400: approx. 220 mm width, up to 6 m/min, approx. 80 kgf
- Support unit: 90 kW vacuum pump, up to -6500 mmAq suction
- Auto-tension winch and wire rope safety line
- Corner (UAC400) and ship-bottom versions
技術規格
已驗證| 物理參數 | |
| 重量 | 350 kg |
|---|---|
| 外形尺寸 | L 1.32 m × W 1.13 m × H 710 mm |
| 移動能力 | |
| 移動類型 | 其他 |
| 速度 | 0.54 km/h |
| 作業環境 | Walls, ceilings and floors of ship hulls and bottoms, oil and water tanks, buildings and nuclear power plants |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 重量 | 350 kg |
|---|---|
| 外形尺寸 | L 1.32 m × W 1.13 m × H 710 mm |
| 移動能力 | |
| 移動類型 | 其他 |
| 速度 | 0.54 km/h |
| 作業環境 | Walls, ceilings and floors of ship hulls and bottoms, oil and water tanks, buildings and nuclear power plants |
圖片



圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the Type UA Abrasive Blasting Robot?
The Type UA is Urakami's remote-controlled abrasive blasting robot. Its main unit sticks to the wall, ceiling or floor of a structure by vacuum and drives itself along the surface while blast cleaning it, preparing steel ship hulls and bottoms, oil and water tanks, gas holders, concrete buildings and bridges, and nucle…
Who makes the Type UA Abrasive Blasting Robot?
The Type UA Abrasive Blasting Robot is made by Urakami Research & Development, a robotics company based in Japan.
How much does the Type UA Abrasive Blasting Robot cost?
Urakami Research & Development has not publicly announced pricing for the Type UA Abrasive Blasting Robot. You can enquire through RobotAIGeek for current pricing.
What is the Type UA Abrasive Blasting Robot used for?
The Type UA Abrasive Blasting Robot is designed for 清潔 and 遠端. It is used in 能源, 建築, and 製造業 settings.
How much does the Type UA Abrasive Blasting Robot weigh?
The Type UA Abrasive Blasting Robot weighs 350 kg.
How fast is the Type UA Abrasive Blasting Robot?
The Type UA Abrasive Blasting Robot can move at speeds of up to 0.54 km/h.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- Type UA Abrasive Blasting Robot vs Lombrico XXS
- Type UA Abrasive Blasting Robot vs Lombrico S Ex-0
- Type UA Abrasive Blasting Robot vs Lombrico XT Ex-0
- Type UA Abrasive Blasting Robot vs Lombrico XXS Ex-0
- Type UA Abrasive Blasting Robot vs Lombrico X FTC Ex-0







