Compact Robotic Machine Tender with FANUC LR Mate Robot - Automated Cells & Equipment RMT Series

Robotic machining: http://robot.fanucamerica.com/Products/Robots/machine-tending-robots.aspx FANUC America Authorized Integrator Automated Cells & Equipment or ACE, provide a wide range of solutions for robotic machine tending using FANUC robots - from machining large parts to smaller machining such as the process seen in this video. This video features ACE's RMT Series Robotic Machine Tender with the fast and compact LR Mate 200iD Robot. At less than 1 meter wide, Automated Cells RMT Series Robotic Machine Tender is perfect for servicing one or two machine tools. The 6-axis LR Mate 200iD robot with a dual end of arm tooling prepares and positions both an empty tote and a tote containing raw parts prior to machine loading. Product may also be conveyed into the cell directly on the included belt conveyors. Once the totes are positioned, the first raw part is picked by the robot and qualified at a regrip station. The robot moves with the qualified part to a position in front of the autodoor, awaiting machine entry. Once a part has been completed, the spindle raises and the machine table is then moved to the robot load position. The autodoor raises permitting machine entry to the robot. Once in the machine, the robot performs a part blow-off… grips the completed part… performs an additional blow off to clean part workholding… loads the raw part… and then exits the machine. The autodoor closes and the next machining cycle begins. The finished part is qualified once again prior to loading into the finished part tote. To learn more about FANUC America Authorized Integrator Automated Cells & Equipment please visit their website at http://www.autocells.com.