RobotAIGeek
★尚未评分

Maker H01

HumanoidChinaChina原型
Maker H01
对比
用途:
拾放研究General service scenarioshousehold tasksembodied-AI data collection and teleoperation research
价格:
未公布

描述

Maker H01是GigaAI(Jijia 极佳视界)的Humanoid。 面向拾放、研究、General service scenarios设计。 关键数据:负载 3 kg、臂展 794 mm、20 自由度。

The Maker H01 is GigaAI's first robot body, and it exists to carry the company's models rather than to compete on raw hardware specification. A humanoid upper torso sits on a four-wheel omnidirectional base, standing 1,620 mm on a deliberately small 600 by 550 mm footprint — GigaAI's stated priority is a compact body that gets through real interiors. Above the base are twenty degrees of freedom: two in the head, four in the torso and seven in each arm, spanning 794 mm, with each arm rated for 3 kg and peaking at 5 kg. The sensor fit is unusually camera-heavy for the class, with eleven cameras in total — an RGBD in the head, one in the chest, one in each hand and five plain RGB cameras in the head — plus a chassis LiDAR and eight ultrasonic sensors, split between mobile navigation below and fine upper-body manipulation above. It supports VR and isomorphic teleoperation for data collection, and runs GigaAI's own embodied-brain control algorithms with open interfaces for secondary development. The point of the machine is the loop it closes: collect via teleoperation, post-train against GigaBrain reference algorithms, deploy back to the robot.

功能特点

  • 1,620 mm tall on a compact 600 x 550 mm footprint, prioritising passability through real interiors
  • 20 degrees of freedom above the base — head 2, torso 4, arms 7 each — plus a four-wheel omnidirectional all-drive chassis
  • 794 mm arm span with 3 kg rated and 5 kg maximum arm payload
  • eleven cameras — head RGBD, chest RGBD, two hand RGBD and five head RGB — with chassis LiDAR and eight ultrasonic sensors, splitting mobile navigation from fine upper-body manipulation
  • VR and isomorphic teleoperation support with an intuitive data-collection platform
  • in-house embodied-brain control algorithms with open interfaces and secondary development
  • ships into a full embodied-development workflow of data collection, post-training against GigaBrain reference algorithms, and real-robot deployment.

技术规格

物理参数
外形尺寸L 600 mm × W 550 mm × H 1.62 m
负载3 kg
臂展794 mm
移动能力
运动类型带轮的
自由度20
操作能力高
作业环境Indoor service and household spaces
执行器Head 2 DoF, torso 4 DoF, single arm 7 DoF (14 total) = 20 DoF above the base; four-wheel omnidirectional all-drive chassis; 794 mm arm span
感知与计算
传感器head RGBD camera, chest RGBD camera, 2x hand RGBD cameras, 5x head RGB cameras, chassis LiDAR, 8x chassis ultrasonic sensors
软件 / AIIn-house embodied-brain control algorithms with open interfaces and secondary-development support; GigaBrain-0 vision-language-action foundation model accepting image, point-cloud, text and proprioceptive input and emitting end-to-end joint commands; GigaWorld-0 world-model data engine for synthetic training data; VR and isomorphic teleoperation for data collection
来源:制造商官网来源:第三方暂无来源来源状态基于该机器人已登记的资料来源。

常见问题

What is the Maker H01?

The Maker H01 is GigaAI's first robot body, and it exists to carry the company's models rather than to compete on raw hardware specification.

Who makes the Maker H01?

The Maker H01 is made by GigaAI(Jijia 极佳视界), a robotics company based in China.

How much does the Maker H01 cost?

GigaAI(Jijia 极佳视界) has not publicly announced pricing for the Maker H01. You can enquire through RobotAIGeek for current pricing.

What is the Maker H01 used for?

The Maker H01 is designed for 拾放, 研究, general service scenarios, and household tasks. It is used in 研究, 住宅, and 零售 settings.

What is the payload capacity of the Maker H01?

The Maker H01 has a payload capacity of 3 kg and a reach of 794 mm.

How many degrees of freedom does the Maker H01 have?

The Maker H01 has 20 degrees of freedom.

与同类机器人对比

看看这款机器人与最接近的同类产品相比表现如何

Maker H01 的替代选择 →

相关机器人

查看更多 >

订阅获取最新机器人资讯?