★아직 평가 없음

SmartROC D65

Industrial-RobotSwedenSweden출시됨
SmartROC D65
비교

설명

SmartROC D65은(는) Epiroc의 Industrial-Robot입니다. 건설, 데이터 수집, 범용 자동화 용도로 설계되었습니다.

The SmartROC D65 is Epiroc's down-the-hole (DTH) surface drill rig for quarrying and mining, a crawler rig that drills holes of 115 to 229 mm (4.6 to 9 in) to a maximum depth of 56 m (183.7 ft) using 4 to 7 inch DTH hammers, including the COP M7 for 229 mm holes, with a DHR6 H rotary head. A 540 HP engine drives a compressor delivering 995 cfm of free air, and an intelligent control system adjusts compressor and engine speed to the job; it carries 300 litres less hydraulic oil than earlier versions. An extra-long feed option with 8 m pipes drills 16 m production holes with only one rod addition. Drilling and rod handling are automated and controlled through the Rig Control System on a touch screen, with Measure While Drilling (MWD) data for each hole. A fully autonomous version was developed together with Fortescue at its Iron Bridge operation in Australia; in 2023 Epiroc reported autonomous SmartROC D65 MKII rigs outperforming manually operated ones, in 2025 it launched the first fully autonomous SmartROC D65 in the US aggregate market with Luck Stone, and in 2026 it reported its autonomous SmartROC fleet expanding across mining and quarrying. Other users named include Kaunis Iron in Sweden.

주요 기능

  • Down-the-hole (DTH) surface drilling for quarrying and mining
  • Hole diameter 115-229 mm (4.6-9 in)
  • Max hole depth 56 m (183.7 ft)
  • DTH hammers 4, 5, 6 and 7 in (COP M7 for 229 mm)
  • Rotary head DHR6 H 45/56/68/78
  • 540 HP engine
  • 995 cfm free air delivery
  • Automated drilling and rod handling
  • Extra-long feed option: 8 m pipes, 16 m holes with one rod addition
  • Intelligent compressor and engine speed control
  • Rig Control System (RCS) on touch screen
  • Measure While Drilling (MWD)
  • Fully autonomous version (developed with Fortescue)
  • FOPS/ROPS cabin

기술 사양

이동성
이동 방식기타
작동 환경Quarries and open-pit surface mines
센싱 & 컴퓨팅
소프트웨어 / AIEpiroc Rig Control System (RCS) on touch screen, Measure While Drilling (MWD), automated drilling and rod handling, fully autonomous option
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the SmartROC D65?

The SmartROC D65 is Epiroc's down-the-hole (DTH) surface drill rig for quarrying and mining, a crawler rig that drills holes of 115 to 229 mm (4.6 to 9 in) to a maximum depth of 56 m (183.7 ft) using 4 to 7 inch DTH hammers, including the COP M7 for 229 mm holes, with a DHR6 H rotary head.

Who makes the SmartROC D65?

The SmartROC D65 is made by Epiroc, a robotics company based in Sweden.

How much does the SmartROC D65 cost?

Epiroc has not publicly announced pricing for the SmartROC D65. You can enquire through RobotAIGeek for current pricing.

What is the SmartROC D65 used for?

The SmartROC D65 is designed for 건설, 데이터 수집, 범용 자동화, and 원격. It is used in 광업 and 건설 settings.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

SmartROC D65 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?