★아직 평가 없음

RACK FORK Auto

Industrial-RobotJapanJapan출시됨
RACK FORK Auto
비교

설명

RACK FORK Auto은(는) Logisnext의 Industrial-Robot입니다. 사내 물류, 적재, 자재 취급 용도로 설계되었습니다. 주요 수치: 가반 하중 1500 kg, 2018년 출시.

RACK FORK Auto is Logisnext's automated three-way forklift for high-bay racking, which can handle loads to the left, right and front without turning the truck body, so it works in much narrower aisles than a reach truck and makes better use of floor space. It carries 1.0 to 1.5 tonnes and lifts to a maximum of 6.5 m, automating put-away and retrieval in tall racks. Sales of the laser-guided version began in November 2018, and a magnetic-guided version is also offered. Laser guidance reads reflectors with a scanner on top of the truck, so only reflectors need installing: no floor works are required (subject to floor flatness), which suits existing or rented warehouses, and layouts are easy to change. Magnetic guidance follows magnet bars embedded in the floor, sensed by a magnetic sensor that steers the truck. Several units can run at once under Logisnext's own Route Optimizer traffic control, which picks the best route automatically and handles emergency avoidance and detours. A front obstacle sensor slows or stops the truck, soft bumpers stop it on contact (side bumpers optional) and LED direction indicators flash on the travel side; optional automatic charging removes battery changes and allows 24-hour operation.

주요 기능

  • Automated three-way handling: left, right and front without turning
  • Narrow aisles compared with reach trucks
  • Loads 1.0-1.5 t
  • lift height up to 6.5 m
  • Laser guidance or magnetic guidance
  • Route Optimizer multi-vehicle control
  • Front obstacle sensor and soft bumpers
  • LED direction indicators
  • Optional automatic charging for 24-hour operation

기술 사양

물리 사양
가반하중1500 kg
이동성
이동 방식바퀴형
작동 환경Indoor warehouses and factories with high-bay racking
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the RACK FORK Auto?

RACK FORK Auto is Logisnext's automated three-way forklift for high-bay racking, which can handle loads to the left, right and front without turning the truck body, so it works in much narrower aisles than a reach truck and makes better use of floor space.

Who makes the RACK FORK Auto?

The RACK FORK Auto is made by Logisnext, a robotics company based in Japan.

How much does the RACK FORK Auto cost?

Logisnext has not publicly announced pricing for the RACK FORK Auto. You can enquire through RobotAIGeek for current pricing.

What is the RACK FORK Auto used for?

The RACK FORK Auto is designed for 사내 물류, 적재, 자재 취급, and 팔레트 운반. It is used in 창고·물류 and 제조 settings.

What is the payload capacity of the RACK FORK Auto?

The RACK FORK Auto has a payload capacity of 1,500 kg.

When was the RACK FORK Auto released?

The RACK FORK Auto was released in 2018.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

RACK FORK Auto 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?