★아직 평가 없음

Oceaneering Isurus ROV

MarineUnited StatesUnited States출시됨
Oceaneering Isurus ROV
비교

설명

Oceaneering Isurus ROV은(는) Oceaneering International의 Marine입니다. 건설, 매니퓰레이션, 측량 용도로 설계되었습니다. 주요 수치: 3400 kg, 가반 하중 227 kg.

Isurus is a true work-class ROV built to keep working in strong currents, purpose-built for offshore wind operations. Based on Oceaneering's Magnum ROV, it combines optimised hydraulic and propulsion packages with a hydrodynamic design, adding up to six hours of operational time per day where tidal and structure-induced currents would stop a conventional ROV - in areas such as West of Shetland, the North Sea, East Asia, India, Brazil and the U.S. It reaches 5 knots forward and reverse, over 2 knots laterally and 1.3 knots vertically. The 3,400 kg vehicle measures 2.6 x 1.6 x 1.9 m, is rated to 3,000 m and carries 227 kg of payload, with two 85 hp hydraulic power units, four vectored horizontal and two vertical thrusters (1,900 lb forward thrust), two 7-function manipulators, a wrist camera assembly and six proportional tool-control valves. Fly-by-wire station keeping, auto heading, depth and altitude and cruise control are standard, and it uses Oceaneering's ORCA real-time condition-assessment software. Typical work includes cable lay, pre- and post-lay cable survey runs, messenger-wire hook-up, foundation installation and deploying subsea crawlers for weld inspection, plus high-speed ROV surveys; Oceaneering launched its fifth and sixth Isurus systems in 2022 on customer demand.

주요 기능

  • True work-class ROV for high currents
  • Up to 6 extra operating hours per day
  • Speed: 5 knots fwd/rev, >2 knots lateral, 1.3 knots vertical
  • 3400 kg in air
  • 2.6 x 1.6 x 1.9 m
  • Depth rating 3000 m
  • Payload 227 kg
  • 2 x 85 hp hydraulic power units
  • 4 vectored horizontal + 2 vertical thrusters
  • 1900 lb forward thrust
  • Two 7-function manipulators
  • wrist camera with laser and light
  • Fly-by-wire station keeping
  • auto heading/depth/altitude
  • ORCA real-time condition assessment software
  • Offshore wind: cable lay, cable survey, foundation installation

기술 사양

검증됨
물리 사양
무게3400 kg in air
크기L 2.6 m
가반하중227 kg
이동성
이동 방식수중형
속도9.3 km/h
조작 능력높음
작동 환경Subsea: offshore oil and gas, renewables and deep water
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Oceaneering Isurus ROV?

Isurus is a true work-class ROV built to keep working in strong currents, purpose-built for offshore wind operations. Based on Oceaneering's Magnum ROV, it combines optimised hydraulic and propulsion packages with a hydrodynamic design, adding up to six hours of operational time per day where tidal and structure-induce…

Who makes the Oceaneering Isurus ROV?

The Oceaneering Isurus ROV is made by Oceaneering International, a robotics company based in United States.

How much does the Oceaneering Isurus ROV cost?

Oceaneering International has not publicly announced pricing for the Oceaneering Isurus ROV. You can enquire through RobotAIGeek for current pricing.

What is the Oceaneering Isurus ROV used for?

The Oceaneering Isurus ROV is designed for 건설, 매니퓰레이션, 측량, and 점검. It is used in 에너지 settings.

What is the payload capacity of the Oceaneering Isurus ROV?

The Oceaneering Isurus ROV has a payload capacity of 227 kg.

How much does the Oceaneering Isurus ROV weigh?

The Oceaneering Isurus ROV weighs 3,400 kg.

How fast is the Oceaneering Isurus ROV?

The Oceaneering Isurus ROV can move at speeds of up to 9.3 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Oceaneering Isurus ROV 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?