설명
M3-FL Forklift Robot은(는) Marorobottech의 Industrial-Robot입니다. 사내 물류, 자재 취급, 팔레트 운반 용도로 설계되었습니다. 주요 수치: 가동 시간 480분, 가반 하중 1000 kg.
The M3-FL is Marorobottech's 1-tonne-class autonomous forklift robot, a low pallet-transport AGV that replaces conventional forklifts and manual hand pallet jacks in factories, production facilities and warehouses. Only 190 mm high, it lifts open pallets standing on the floor and also low-clearance carts, raising them from 95 mm to 333 mm with a 950 mm fork reach. It navigates with floor QR codes plus 2D LiDAR, positions to about ±5 mm on QR codes (±1 cm and ±1 degree overall), drives straight and turns on the spot, and climbs slopes of up to 5 degrees. It travels at up to 1.8 m/s empty and 1.5 m/s fully loaded, runs up to 8 hours empty or 6 hours at full load, recharges automatically in up to 2 hours for unattended 24/7 work and connects over Wi-Fi. It is managed by Marorobottech's Robot Control System (RCS) fleet software, which integrates with MES and WMS, and can be deployed without stopping the production line.
주요 기능
- Payload 1,000 kg
- Lifts open floor pallets and low-clearance carts
- Lift height 95-333 mm
- fork reach 950 mm
- QR code + 2D LiDAR navigation
- ±5 mm on QR codes
- Up to 1.8 m/s empty, 1.5 m/s loaded
- Straight travel and in-place rotation
- slopes up to 5 degrees
- Up to 8 h empty / 6 h loaded
- charges in up to 2 h with automatic charging
- RCS fleet software with MES/WMS integration
- Wi-Fi
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 1.2 m × W 1.25 m × H 190 mm |
|---|---|
| 가반하중 | 1000 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 6.48 km/h |
| 작동 환경 | Indoor factories, production lines and warehouses |
| 전원 | |
| 배터리 지속 시간 | 480 min |
| 센싱 & 컴퓨팅 | |
| 센서 | Floor QR-code reader, 2D LiDAR |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 1.2 m × W 1.25 m × H 190 mm |
|---|---|
| 가반하중 | 1000 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 6.48 km/h |
| 작동 환경 | Indoor factories, production lines and warehouses |
| 전원 | |
| 배터리 지속 시간 | 480 min |
| 센싱 & 컴퓨팅 | |
| 센서 | Floor QR-code reader, 2D LiDAR |
이미지
martti
martti
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the M3-FL Forklift Robot?
The M3-FL is Marorobottech's 1-tonne-class autonomous forklift robot, a low pallet-transport AGV that replaces conventional forklifts and manual hand pallet jacks in factories, production facilities and warehouses.
Who makes the M3-FL Forklift Robot?
The M3-FL Forklift Robot is made by Marorobottech, a robotics company based in South Korea.
How much does the M3-FL Forklift Robot cost?
Marorobottech has not publicly announced pricing for the M3-FL Forklift Robot. You can enquire through RobotAIGeek for current pricing.
What is the M3-FL Forklift Robot used for?
The M3-FL Forklift Robot is designed for 사내 물류, 자재 취급, 팔레트 운반, and 운반. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the M3-FL Forklift Robot?
The M3-FL Forklift Robot has a payload capacity of 1,000 kg.
How fast is the M3-FL Forklift Robot?
The M3-FL Forklift Robot can move at speeds of up to 6.48 km/h.
What is the battery life of the M3-FL Forklift Robot?
The M3-FL Forklift Robot runs for about 480 minutes on a charge.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- M3-FL Forklift Robot vs iSAGEBOT Forklift Robot
- M3-FL Forklift Robot vs Grenzebach FF1200S
- M3-FL Forklift Robot vs Grenzebach L1200S
- M3-FL Forklift Robot vs Grenzebach OL1200S
- M3-FL Forklift Robot vs Wonik Robotics WR600LF
