★아직 평가 없음

Gridbots Stinger-HYDROBLAST

Cleaning-RobotsIndiaIndia출시됨
Gridbots Stinger-HYDROBLAST
비교
용도:
청소UHP water-jet descaling and lining removal inside pipelines
가격:
미공개
모델:
GB-STINGER-HB (150 / 300 / 600 / 1200)

설명

Gridbots Stinger-HYDROBLAST은(는) Gridbots의 Cleaning-Robots입니다. 청소, UHP water-jet descaling and lining removal inside pipelines 용도로 설계되었습니다. 주요 수치: 55 kg.

Gridbots Stinger-HYDROBLAST is a tracked in-pipe robot from Gridbots that cleans pipelines from the inside with ultra-high-pressure water jets of up to 1000 bar, removing hard scale, rust, deposits, sludge, old coatings and linings down to bare metal. Because it cleans with water alone - no grinding, abrasives or chemicals - the process is spark-free, which suits pipelines that carried hydrocarbons, gases or other flammable products. Steel-wire reinforced tracks hold the robot against the jet reaction force, and a rotary jetting head sweeps the full 360 degrees of the bore at 0 to 300 rpm with interchangeable sapphire or ceramic nozzles. Three HD cameras (front, jet view and rear) with LED illuminators and a laser ring profiler show the work through the spray and measure remaining deposits and pipe ovality; the operator controls travel, head rotation and the pump dump valve from a splash-proof HDMI touch console, with manual, semi-automatic and constant-speed automatic passes. Four models (GB-STINGER-HB 150, 300, 600 and 1200) cover pipes of 150 mm to 2500 mm internal diameter at 20 to 80 L/min, weighing 12 to 55 kg. The robots move at up to 50 mm/s with 0.1 mm encoder resolution, are built from SS-316, rated IP68 and work from 5 to 65 C on a tether and UHP hose of up to 100 m, with standard 500-1000 bar jetting pumps and a 1 kW single-phase supply.

주요 기능

  • Water jetting up to 1000 bar
  • spark-free, no abrasives or chemicals
  • 360 degree rotary jetting head, 0-300 rpm, sapphire/ceramic nozzle inserts
  • Four models for pipe ID 150-2500 mm
  • 20-80 L/min
  • Steel-wire reinforced tracks resist jet reaction
  • 3 HD cameras (front, jet view, rear) with LED illuminators
  • Laser ring profiler for deposit thickness and ovality
  • Remote pump dump-valve control
  • manual, semi-auto and constant-speed automatic passes
  • Up to 50 mm/s, 0.1 mm encoder resolution
  • Tether and 1000 bar UHP hose up to 100 m
  • SS-316, IP68
  • ATEX/IECEx variant on request

기술 사양

검증됨
물리 사양
무게55 kg
이동성
이동 방식기타
속도0.18 km/h
작동 환경Inside pipelines 150-2500 mm ID, incl. hydrocarbon lines; submersible; IP68, 5°C to 65°C
센싱 & 컴퓨팅
센서3 HD cameras, laser ring profiler, inclination sensor, pressure monitoring, water ingress sensor, tether tension monitoring, optional gas sensors
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Gridbots Stinger-HYDROBLAST?

Gridbots Stinger-HYDROBLAST is a tracked in-pipe robot from Gridbots that cleans pipelines from the inside with ultra-high-pressure water jets of up to 1000 bar, removing hard scale, rust, deposits, sludge, old coatings and linings down to bare metal.

Who makes the Gridbots Stinger-HYDROBLAST?

The Gridbots Stinger-HYDROBLAST is made by Gridbots, a robotics company based in India.

How much does the Gridbots Stinger-HYDROBLAST cost?

Gridbots has not publicly announced pricing for the Gridbots Stinger-HYDROBLAST. You can enquire through RobotAIGeek for current pricing.

What is the Gridbots Stinger-HYDROBLAST used for?

The Gridbots Stinger-HYDROBLAST is designed for 청소 and uhp water-jet descaling and lining removal inside pipelines. It is used in 에너지 and 제조 settings.

How much does the Gridbots Stinger-HYDROBLAST weigh?

The Gridbots Stinger-HYDROBLAST weighs 55 kg.

How fast is the Gridbots Stinger-HYDROBLAST?

The Gridbots Stinger-HYDROBLAST can move at speeds of up to 0.18 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Gridbots Stinger-HYDROBLAST 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?