설명
Gridbots GECKO은(는) Gridbots의 Industrial-Robot입니다. 데이터 수집, 점검, 모니터링 용도로 설계되었습니다. 주요 수치: 14 kg, 가반 하중 10 kg.
Gridbots GECKO (listed as Magneto-GECKO) is a compact magnetic-adhesion crawler from Gridbots that climbs vertical, inclined, curved and overhead steel surfaces to inspect them without scaffolding, rope access or confined-space entry. It is aimed at storage tanks, boiler waterwalls, pressure vessels, pipelines, chimneys, ship hulls and wind towers. The robot holds itself to the steel with an array of NdFeB magnets and active stand-off compensation, giving 100 kg of adhesion while carrying up to 10 kg of sensors. Four powered wheels drive it at up to 10 mm/s, and wheel encoders plus a 6-DOF IMU tag every reading with its position to 0.1 mm. It works on convex and concave surfaces down to 300 mm in diameter and on steel at least 4 mm thick. Quick-swap sensor modules combine ultrasonic wall-thickness measurement (pulse-echo and echo-to-echo through coatings up to 2 mm, 1-100 mm range, +/-0.1 mm accuracy), a 16- or 32-channel Hall-effect Magnetic Flux Leakage array for fast corrosion screening, and a 4K camera with 10x optical zoom plus three FHD navigation cameras. The rugged controller shows live video, UT A-scans and MFL traces, builds C-scan thickness and corrosion maps in real time and exports PDF and CSV reports. The crawler weighs 8-14 kg depending on variant, runs from 12 V (400 W peak) over a Kevlar-roped tether of 10 to 100 m, and is rated IP65 for 5-65 C.
주요 기능
- Magnetic adhesion with NdFeB magnet array and active stand-off compensation
- 100 kg adhesion force
- Climbs vertical, inclined, curved and overhead steel
- 90 degree transitions
- Convex and concave surfaces from 300 mm diameter
- steel from 4 mm thick
- Ultrasonic thickness: 1-100 mm range, +/-0.1 mm accuracy, through coatings up to 2 mm
- MFL Hall-effect array, 16/32 channels, 150/300 mm scan width per pass
- 4K UHD inspection camera with 10x optical zoom plus 3 FHD navigation cameras
- Four powered wheels, 0.1 mm encoder resolution, 100 Hz 6-DOF IMU
- Real-time C-scan thickness and MFL corrosion maps
- PDF/CSV report export
- Quick-swap sensor modules (UT, MFL, EMAT, camera)
- Tether 10-100 m with Kevlar safety rope
- edge-detection TOF sensors and adhesion monitoring with auto-stop
기술 사양
검증됨| 물리 사양 | |
| 무게 | 14 kg |
|---|---|
| 가반하중 | 10 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 0.04 km/h |
| 작동 환경 | Steel tanks, boilers, vessels, pipes, hulls and towers; IP65, 5°C to 65°C |
| 센싱 & 컴퓨팅 | |
| 센서 | ultrasonic thickness probe, MFL Hall-effect sensor array, 4K zoom camera, 3 FHD navigation cameras, 6-DOF IMU, wheel encoders, 4 TOF edge sensors |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 14 kg |
|---|---|
| 가반하중 | 10 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 0.04 km/h |
| 작동 환경 | Steel tanks, boilers, vessels, pipes, hulls and towers; IP65, 5°C to 65°C |
| 센싱 & 컴퓨팅 | |
| 센서 | ultrasonic thickness probe, MFL Hall-effect sensor array, 4K zoom camera, 3 FHD navigation cameras, 6-DOF IMU, wheel encoders, 4 TOF edge sensors |
이미지




이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Gridbots GECKO?
Gridbots GECKO (listed as Magneto-GECKO) is a compact magnetic-adhesion crawler from Gridbots that climbs vertical, inclined, curved and overhead steel surfaces to inspect them without scaffolding, rope access or confined-space entry.
Who makes the Gridbots GECKO?
The Gridbots GECKO is made by Gridbots, a robotics company based in India.
How much does the Gridbots GECKO cost?
Gridbots has not publicly announced pricing for the Gridbots GECKO. You can enquire through RobotAIGeek for current pricing.
What is the Gridbots GECKO used for?
The Gridbots GECKO is designed for 데이터 수집, 점검, 모니터링, and 스캐닝. It is used in 에너지 and 제조 settings.
What is the payload capacity of the Gridbots GECKO?
The Gridbots GECKO has a payload capacity of 10 kg.
How much does the Gridbots GECKO weigh?
The Gridbots GECKO weighs 14 kg.
How fast is the Gridbots GECKO?
The Gridbots GECKO can move at speeds of up to 0.04 km/h.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Gridbots GECKO vs Inspector V8
- Gridbots GECKO vs Inspector Gasfinder
- Gridbots GECKO vs A2072 IntroScan
- Gridbots GECKO vs Gridbots Stinger-PIPEMATIK
- Gridbots GECKO vs Operator








