★아직 평가 없음

FLEXIMOVER trike

Industrial-RobotAustriaAustria출시됨
FLEXIMOVER trike
비교
가격:
미공개
모델:
DS Automotion FLEXIMOVER trike

설명

FLEXIMOVER trike은(는) DS Automotion의 Industrial-Robot입니다. 조립, 운반 용도로 설계되었습니다. 주요 수치: 가반 하중 800 kg.

The FLEXIMOVER trike is DS Automotion's three-wheeled assembly AGV, a flexible standard vehicle for pre-assembly and final assembly lines. At only 600 mm wide it can carry narrow components comfortably, and a free footwell behind the drive unit lets workers step right up to the part without stooping; an electromechanical lifting table of up to 1,000 mm keeps the working height right. It carries up to 800 kg at up to 1.0 m/s in either continuous-flow or stop-and-go assembly, follows magnetic tape (glued or milled in), optical or active inductive guidance, and uses SIL-certified safety components with a safety laser scanner in the direction of travel. Standard Siemens S7 PLC components run DS Automotion's own vehicle software, and the energy concept - powercaps, LFP batteries or permanent inductive charging - is sized to the shift model and cycle time.

주요 기능

  • Assembly AGV
  • payload up to 800 kg
  • Width only 600 mm
  • free footwell for ergonomic access
  • Up to 1.0 m/s
  • continuous or stop-and-go operation
  • Electromechanical lifting table up to 1,000 mm
  • Guidance: magnetic tape, optical or active inductive
  • SIL-certified safety components
  • safety laser scanner (PLS) in direction of travel
  • Siemens S7 TIA PLC control with in-house vehicle software
  • Powercap, LFP or inductive power transfer
  • 1,800 x 600 x 400 mm

기술 사양

검증됨
물리 사양
크기L 1.8 m × W 600 mm × H 400 mm
가반하중800 kg
이동성
이동 방식바퀴형
속도3.6 km/h
작동 환경Pre-assembly and final assembly lines in factories
전원
충전 방식Powercap, LFP battery or inductive power transfer; automatic charging
센싱 & 컴퓨팅
센서Safety laser scanner (PLS) in the direction of travel, SIL-certified safety components
소프트웨어 / AISiemens S7 TIA PLC with in-house vehicle software; navigation: Magnetic tape, optical or active inductive track guidance
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the FLEXIMOVER trike?

The FLEXIMOVER trike is DS Automotion's three-wheeled assembly AGV, a flexible standard vehicle for pre-assembly and final assembly lines.

Who makes the FLEXIMOVER trike?

The FLEXIMOVER trike is made by DS Automotion, a robotics company based in Austria.

How much does the FLEXIMOVER trike cost?

DS Automotion has not publicly announced pricing for the FLEXIMOVER trike. You can enquire through RobotAIGeek for current pricing.

What is the FLEXIMOVER trike used for?

The FLEXIMOVER trike is designed for 조립 and 운반. It is used in 자동차 and 제조 settings.

What is the payload capacity of the FLEXIMOVER trike?

The FLEXIMOVER trike has a payload capacity of 800 kg.

How fast is the FLEXIMOVER trike?

The FLEXIMOVER trike can move at speeds of up to 3.6 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

FLEXIMOVER trike 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?