설명
The CRP-RH14-06-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production. It carries a 6 kg payload to a maximum reach of 1468 mm and repeats to +/-0.08 mm, with a 155 kg body that mounts either on the ground or inverted from a frame. The arm is built around welding rather than adapted to it: the J4 and J6 axes are hollow so a hollow welding gun can pass through them, the user signal line, gas pipe and welding cable are routed inside the casting for a smooth snag-free body, and the first two axes carry dust covers with a fully surrounded torch. CRP rates it IP56 and specifies an operating range of 0~45°C. The robot ships with CRP's own controller cabinet and is sold alongside the company's positioners for coordinated multi-axis welding cells.
주요 기능
- Use high-speed motor, and do software optimization, the overall beat is 20% faster than the previous generation
- Lighter weight, smaller forearm size, better accessibility
- High protection :1,2 shafts are equipped with dustproof cover, and fully surrounded welding gun is used at the same time
- J4,J6 axis hollow structure, can use hollow welding gun
- Built-in user line, gas pipe, welding cable, smooth body, clean appearance
기술 사양
검증됨| 물리 사양 | |
| 무게 | 155 kg |
|---|---|
| 가반하중 | 6 kg |
| 도달거리 | 1.47 m |
| 반복 정밀도 | ±0.08 mm |
| 소재 | Cast aluminium alloy |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Ip56 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G |
기술 사양
검증됨| 물리 사양 | |
| 무게 | 155 kg |
|---|---|
| 가반하중 | 6 kg |
| 도달거리 | 1.47 m |
| 반복 정밀도 | ±0.08 mm |
| 소재 | Cast aluminium alloy |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Ip56 protection, operating temperature 0~45°C, relative humidity 20-80% non-condensing, vibration under 0.5 G |
이미지
martti
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the CRP-RH14-06-W?
The CRP-RH14-06-W is a six-axis vertically articulated welding robot from Chengdu CRP Robot Technology, built for arc welding in general fabrication, automotive, electronics and new-energy production.
Who makes the CRP-RH14-06-W?
The CRP-RH14-06-W is made by Chengdu CRP Robot Technology, a robotics company based in China.
How much does the CRP-RH14-06-W cost?
Chengdu CRP Robot Technology has not publicly announced pricing for the CRP-RH14-06-W. You can enquire through RobotAIGeek for current pricing.
What is the CRP-RH14-06-W used for?
The CRP-RH14-06-W is designed for 조립, 범용 자동화, 자재 취급, and 용접. It is used in 자동차, 전자, 에너지, and 제조 settings.
What is the payload capacity of the CRP-RH14-06-W?
The CRP-RH14-06-W has a payload capacity of 6 kg and a reach of 1.47 m.
How much does the CRP-RH14-06-W weigh?
The CRP-RH14-06-W weighs 155 kg.
How many degrees of freedom does the CRP-RH14-06-W have?
The CRP-RH14-06-W has 6 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- CRP-RH14-06-W vs Welding robot KW1012B-2010
- CRP-RH14-06-W vs Robot welding KW1010B-1440
- CRP-RH14-06-W vs UniBot iR18-1000
- CRP-RH14-06-W vs UniBot iR18-1200
- CRP-RH14-06-W vs Neuromeka Indy12 V3