★아직 평가 없음

CP20-S Pallet Handling Robot

Industrial-RobotChinaChina출시됨
CP20-S Pallet Handling Robot
비교

설명

CP20-S Pallet Handling Robot은(는) CoTEK Robotics의 Industrial-Robot입니다. 사내 물류, 자재 취급, 팔레트 운반 용도로 설계되었습니다. 주요 수치: 630 kg, 가동 시간 480분, 가반 하중 2000 kg.

The CP20-S Pallet Handling Robot is CoTEK Robotics' high-speed autonomous pallet truck (AMR) for large warehouses and long-distance, high-throughput transport, carrying up to 2,000 kg. It is sold ready to use, with decentralised control, a minimal operating interface and tasks that users can update themselves without dedicated system staff. Navigation uses CoTEK's laser SLAM, laser reflector and visual fusion perception, with layered obstacle avoidance, person recognition, pallet recognition and empty-slot recognition. It measures 1,866 x 730 x 2,170 mm, weighs 630 kg, travels at 2.3 m/s loaded and 2.7 m/s empty, stops within 10 mm and needs a 2,680 mm aisle; a 24 V 160 Ah battery gives 6-8 hours. It runs CoTEK's SmartGO on-board control system with C-Navi laser or laser-SLAM navigation, and the Swarm Pro group-intelligence dispatching system can coordinate fleets and link them to ERP, MES and WMS systems. Safety covers RGB-D camera recognition of people and vehicles and small obstacles, single-laser 180-degree obstacle avoidance (optional dual-laser 270-degree), side ultrasonic sensors, a pallet-in-place sensor, a mechanical bumper strip and emergency stop buttons, and it supports postman, call and delivery operating modes.

주요 기능

  • Rated load 2,000 kg at 600 mm load centre
  • Laser / laser-SLAM navigation with visual fusion perception
  • 2.3 m/s loaded, 2.7 m/s empty
  • Person, pallet and empty-slot recognition
  • Parking accuracy 10 mm
  • aisle width 2,680 mm
  • turning radius 1,700 mm
  • Forks 55/170/1,150 (1,220) mm
  • outer width 540/685 mm (optional)
  • 24 V / 160 Ah battery, 6-8 h, automatic or manual charging
  • Fork-tip vision and infrared detection, RGB-D camera, 180/270-degree laser, bumper
  • Postman, call and delivery modes

기술 사양

검증됨
물리 사양
무게630 kg
크기L 1.87 m × W 730 mm × H 2.17 m
가반하중2000 kg
이동성
이동 방식바퀴형
속도9.72 km/h
작동 환경Indoor factories, workshops and warehouses (closed areas without public traffic)
전원
배터리 지속 시간480 min
센싱 & 컴퓨팅
센서laser scanner (single 180-degree, optional dual 270-degree), RGB-D camera (person and vehicle recognition, small obstacles), ultrasonic sensors (both sides), pallet-in-place sensor, mechanical bumper strip, emergency stop buttons
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the CP20-S Pallet Handling Robot?

The CP20-S Pallet Handling Robot is CoTEK Robotics' high-speed autonomous pallet truck (AMR) for large warehouses and long-distance, high-throughput transport, carrying up to 2,000 kg.

Who makes the CP20-S Pallet Handling Robot?

The CP20-S Pallet Handling Robot is made by CoTEK Robotics, a robotics company based in China.

How much does the CP20-S Pallet Handling Robot cost?

CoTEK Robotics has not publicly announced pricing for the CP20-S Pallet Handling Robot. You can enquire through RobotAIGeek for current pricing.

What is the CP20-S Pallet Handling Robot used for?

The CP20-S Pallet Handling Robot is designed for 사내 물류, 자재 취급, 팔레트 운반, and 운반. It is used in 창고·물류 and 제조 settings.

What is the payload capacity of the CP20-S Pallet Handling Robot?

The CP20-S Pallet Handling Robot has a payload capacity of 2,000 kg.

How much does the CP20-S Pallet Handling Robot weigh?

The CP20-S Pallet Handling Robot weighs 630 kg.

How fast is the CP20-S Pallet Handling Robot?

The CP20-S Pallet Handling Robot can move at speeds of up to 9.72 km/h.

What is the battery life of the CP20-S Pallet Handling Robot?

The CP20-S Pallet Handling Robot runs for about 480 minutes on a charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

CP20-S Pallet Handling Robot 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?