★아직 평가 없음

AGIBOT D1 MaxPro

QuadrupedChinaChina출시됨
AGIBOT D1 MaxPro
비교
출처:
용도:
순찰Industrial inspection with meter reading and defect detectionfirefighting and emergency responseheavy logistics transport
가격:
미공개

설명

AGIBOT D1 MaxPro은(는) AgiBot Inc. (Zhiyuan Robotics)의 Quadruped입니다. 순찰, Industrial inspection with meter reading and defect detection, firefighting and emergency response 용도로 설계되었습니다. 주요 수치: 68 kg, 가동 시간 120분, 가반 하중 50 kg.

AGIBOT D1 MaxPro is the heavy-duty quadruped of the D1 line: 68 kg carrying a rated 50 kg payload, which is what separates it from the rest of the family. Reinforcement-learning motion control gives all-terrain adaptability, it runs at up to 3 m/s unloaded, climbs 45° slopes and takes continuous stairs up to 30 cm including open-riser industrial staircases, with a proven self-righting mechanism after falls. A 2,160 Wh battery sustains two hours at rated payload or five and a half hours unloaded, supports quick swapping and an optional autonomous charging dock. IP67 protection and a -20 °C to 55 °C operating range suit industrial inspection, firefighting and emergency response, and heavy logistics.

주요 기능

  • 50 kg rated payload on a 68 kg body
  • 2,160 Wh battery giving 2 h at rated load or 5.5 h unloaded, with quick swap and optional autonomous charging dock
  • 45° maximum climbing angle and continuous 30 cm stair climbing including open-riser industrial stairs
  • self-righting after falls
  • IP67 protection rated -20 °C to 55 °C
  • reinforcement-learning motion control with autonomous patrol and environmental perception modules.

기술 사양

검증됨
물리 사양
무게68 kg
가반하중50 kg
이동성
이동 방식사족보행
속도10.8 km/h
조작 능력낮음
작동 환경All-terrain; 45° maximum climbing angle; continuous stair climbing to 30 cm, IP67, -20°C to 55°C
전원
배터리 지속 시간2 h at rated payload, 5.5 h unloaded
센싱 & 컴퓨팅
소프트웨어 / AIReinforcement-learning motion control; autonomous patrol and environmental perception
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the AGIBOT D1 MaxPro?

AGIBOT D1 MaxPro is the heavy-duty quadruped of the D1 line: 68 kg carrying a rated 50 kg payload, which is what separates it from the rest of the family.

Who makes the AGIBOT D1 MaxPro?

The AGIBOT D1 MaxPro is made by AgiBot Inc. (Zhiyuan Robotics), a robotics company based in China.

How much does the AGIBOT D1 MaxPro cost?

AgiBot Inc. (Zhiyuan Robotics) has not publicly announced pricing for the AGIBOT D1 MaxPro. You can enquire through RobotAIGeek for current pricing.

What is the AGIBOT D1 MaxPro used for?

The AGIBOT D1 MaxPro is designed for 순찰, industrial inspection with meter reading and defect detection, firefighting and emergency response, and heavy logistics transport. It is used in 창고·물류, 제조, and 보안·순찰 settings.

What is the payload capacity of the AGIBOT D1 MaxPro?

The AGIBOT D1 MaxPro has a payload capacity of 50 kg.

How much does the AGIBOT D1 MaxPro weigh?

The AGIBOT D1 MaxPro weighs 68 kg.

How fast is the AGIBOT D1 MaxPro?

The AGIBOT D1 MaxPro can move at speeds of up to 10.8 km/h.

What is the battery life of the AGIBOT D1 MaxPro?

The AGIBOT D1 MaxPro runs for 2 h at rated payload, 5.5 h unloaded on a charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

AGIBOT D1 MaxPro 대체 로봇 →

구매 가이드 및 가격

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?