説明
ANATROLLER ARI-100はRobotics DesignのCleaning-Robotsです。 清掃、コーティング、噴霧向けに設計されています。 主な数値:8 kg、可搬質量 50 kg。
The ANATROLLER ARI-100 is Robotics Design's professional tele-operated duct cleaning and inspection robot, presented as its gold standard for hospitals, factories and hazardous ductwork. An articulated arm moves the pneumatic brush and other tools in all directions, and the robot climbs 5-inch obstacles and 45-degree slopes, so it can clean a whole duct section in one pass even where the duct changes size or turns. It weighs 8 kg, tows 45 kg and carries 50 kg, runs on large wheels or tracks, and fits most ducts from 8 x 6 inches; with a scissor-lift attachment it holds the largest brushes for ducts up to 78 x 78 inches. A single 100- to 200-foot cable carries pressurised air and power, a built-in +/-90-degree camera and a removable 360-degree camera stream to the tablet PC control system, and it ships in a carrying case with a security key. Accessories include the ProCoat coating, sealing and spraying attachment, the VacAid vacuum holder, an electric brush motor, the OnePassMulticleaner, extension rods and a cable extension to 200 feet.
特長
- Tele-operated professional duct cleaning and inspection robot
- Articulated arm moves brushes and tools in all directions
- Climbs 5 in obstacles and 45-degree slopes
- Weighs 8 kg, tows 45 kg, carries 50 kg
- Fits ducts from 8 x 6 in
- cleans up to 78 x 78 in with scissor lift
- Single 100-200 ft cable for pressurised air and power
- Built-in +/-90-degree camera plus removable 360-degree camera
- Brushes, whips, vacuums, sprays, coats, seals, disinfects and polishes
- Accessories: ProCoat, VacAid, electric brush motor, OnePassMulticleaner, extension rods, cable extension
技術仕様
検証済み| 本体 | |
| 重量 | 8 kg |
|---|---|
| 可搬重量 | 50 kg |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 使用環境 | Commercial, industrial, hospital and hazardous HVAC ductwork from 8 x 6 in up to 78 x 78 in |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 8 kg |
|---|---|
| 可搬重量 | 50 kg |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 使用環境 | Commercial, industrial, hospital and hazardous HVAC ductwork from 8 x 6 in up to 78 x 78 in |
画像






投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the ANATROLLER ARI-100?
The ANATROLLER ARI-100 is Robotics Design's professional tele-operated duct cleaning and inspection robot, presented as its gold standard for hospitals, factories and hazardous ductwork.
Who makes the ANATROLLER ARI-100?
The ANATROLLER ARI-100 is made by Robotics Design, a robotics company based in Canada.
How much does the ANATROLLER ARI-100 cost?
Robotics Design has not publicly announced pricing for the ANATROLLER ARI-100. You can enquire through RobotAIGeek for current pricing.
What is the ANATROLLER ARI-100 used for?
The ANATROLLER ARI-100 is designed for 清掃, コーティング, 噴霧, and 点検. It is used in 施設, 清掃・施設管理, and 医療 settings.
What is the payload capacity of the ANATROLLER ARI-100?
The ANATROLLER ARI-100 has a payload capacity of 50 kg.
How much does the ANATROLLER ARI-100 weigh?
The ANATROLLER ARI-100 weighs 8 kg.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- ANATROLLER ARI-100 vs Vulcan
- ANATROLLER ARI-100 vs AMR-AI-PJ-UVGI Robot
- ANATROLLER ARI-100 vs Sunburst UV Bot
- ANATROLLER ARI-100 vs ECOVACS DEEBOT PRO M1 3D
- ANATROLLER ARI-100 vs Apricot AURA










