説明
Ambrogio 4.50 PRO 4WDはAmbrogioのMobile-Robotsです。 マッピング、ナビゲーション、サービス向けに設計されています。 主な数値:52 kg、稼働時間 660 分。
Ambrogio 4.50 PRO 4WD is the four-wheel-drive version of the 4.50, built for areas of up to 80,000 m2 with slopes of up to 60% and 55% near edges. RTK navigation and safety sensors give precise wire-free cutting, and a 60 Ah, 1,554 Wh lithium battery provides up to 11 hours of continuous work with automatic recharging. It belongs to the Ambrogio Professional line for large green areas such as public parks, corporate grounds, hotels, sports fields and municipalities. It cuts with three 4-point star blades giving an 84 cm total cutting width, with cutting height 25-60 mm and motorized height adjustment. Its 25.9 V lithium-ion battery gives an average working time of about 11 h 00 min, and the robot weighs 52 kg with battery. Ambrogio rates it for slopes of 60% allowable, 55% maximum, 55% at the edge or wire. Control is by touch display on the robot with Bluetooth LTE for the app; ZCS Connect adds GPS-GSM remote control. Measured noise is 69 dB(A) and protection is rated IPx44.
特長
- 4WD
- slopes up to 60% (55% at edges)
- Three blades, 84 cm total cutting width
- 60 Ah 1,554 Wh battery, up to 11 h per charge
- Coverage up to 80,000 m2
- RTK navigation with pre-set paths, no perimeter wire
- Motorised height adjustment 25-60 mm
- touchscreen display
技術仕様
検証済み| 本体 | |
| 重量 | 52 kg |
|---|---|
| 移動性能 | |
| 移動方式 | 車輪型 |
| 使用環境 | Outdoor large green areas: public parks, corporate grounds, hotels, sports fields and municipal land; wire-free with RTK, IPx44 |
| 電源 | |
| バッテリー駆動時間 | 660 min |
| 充電方式 | Automatic return to base, contact charging |
| センシング・演算 | |
| センサー | GPS RTK receiver, Rain sensor, Ultrasonic obstacle sensor |
| 接続性 | Bluetooth LTE, ZCS Connect GPS-GSM |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 52 kg |
|---|---|
| 移動性能 | |
| 移動方式 | 車輪型 |
| 使用環境 | Outdoor large green areas: public parks, corporate grounds, hotels, sports fields and municipal land; wire-free with RTK, IPx44 |
| 電源 | |
| バッテリー駆動時間 | 660 min |
| 充電方式 | Automatic return to base, contact charging |
| センシング・演算 | |
| センサー | GPS RTK receiver, Rain sensor, Ultrasonic obstacle sensor |
| 接続性 | Bluetooth LTE, ZCS Connect GPS-GSM |
画像

投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Ambrogio 4.50 PRO 4WD?
Ambrogio 4.50 PRO 4WD is the four-wheel-drive version of the 4.50, built for areas of up to 80,000 m2 with slopes of up to 60% and 55% near edges.
Who makes the Ambrogio 4.50 PRO 4WD?
The Ambrogio 4.50 PRO 4WD is made by Ambrogio, a robotics company based in Italy.
How much does the Ambrogio 4.50 PRO 4WD cost?
Ambrogio has not publicly announced pricing for the Ambrogio 4.50 PRO 4WD. You can enquire through RobotAIGeek for current pricing.
What is the Ambrogio 4.50 PRO 4WD used for?
The Ambrogio 4.50 PRO 4WD is designed for マッピング, ナビゲーション, サービス, and autonomous lawn mowing. It is used in 商業, 施設, 政府・公共, and レジャー・観光 settings.
How much does the Ambrogio 4.50 PRO 4WD weigh?
The Ambrogio 4.50 PRO 4WD weighs 52 kg.
What is the battery life of the Ambrogio 4.50 PRO 4WD?
The Ambrogio 4.50 PRO 4WD runs for about 660 minutes on a charge.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Ambrogio 4.50 PRO 4WD vs Ambrogio 4.0 PRO 4WD
- Ambrogio 4.50 PRO 4WD vs Ambrogio 4.36 PRO
- Ambrogio 4.50 PRO 4WD vs Ambrogio 4.36 PRO 4WD
- Ambrogio 4.50 PRO 4WD vs Ambrogio 4.50 PRO
- Ambrogio 4.50 PRO 4WD vs Ambrogio Twenty RTK





