説明
A2072 IntroScanはIntroScan TechnologyのIndustrial-Robotです。 データ収集、点検、スキャン向けに設計されています。 主な数値:18 kg、稼働時間 480 分。
A2072 IntroScan is an autonomous robotic in-line scanner-flaw detector for steel process pipelines, used above all on the piping of gas compressor stations. It drives inside pipes, bends, tees, reducers and valves from DN 300 to DN 1400 without the pipeline being cut open or cleaned, steering around contaminated areas, and finds, classifies and sizes defects in the pipe metal and welds, detects foreign objects and dirt, and locates places where the protective coating has come away. It is loaded through existing manholes, vent lines from DN 300 or process openings of about 340 x 240 mm. Magnetic motor-wheel modules built on rare-earth magnets hold it to the wall with a 600 N breakaway force, so it can climb vertical and oily surfaces and move along or around the pipe in any direction; Hall sensors detect wheel lift-off and three-axis MEMS inclinometers in each module trace the route and support automatic motion control. A two-axle platform lets it pass unequal tees and obstacles. For inspection it carries an antenna array of 32 dry point-contact ultrasonic transducers (20-80 kHz, shear-horizontal guided waves, defects deeper than 10% of wall thickness, up to 4 m inspected from one position) and front and rear HD camera modules with 5 MP sensors, 180-degree lenses, LED floodlights, a projection laser and a methane sensor. With no tether, it is controlled and streams data and video in real time over a Wi-Fi radio link up to 1,500 m from the entry point, running up to 8 hours on 200 Wh lithium iron phosphate polymer batteries.
特長
- Autonomous in-line inspection of steel process pipelines DN 300-1400
- Passes pipes, bends, tees, reducers and valves
- no cleaning or cutting needed
- Magnetic motor-wheel modules, 600 N breakaway force
- climbs vertical and oily walls
- Hall sensors and 3-axis MEMS inclinometers for route tracing and automatic motion
- 32-element dry point-contact ultrasonic antenna array, 20-80 kHz SH guided waves
- Detects defects deeper than 10% of wall thickness, up to 4 m per position
- Front and rear HD cameras (5 MP, 180-degree lens), LED floodlights, projection laser
- Methane concentration sensor
- Untethered Wi-Fi control and real-time data up to 1,500 m from entry
- 200 Wh batteries, up to 8 h
- 5 m/min transport, 0.3-0.7 m/min inspection
- Loads through manholes, vent lines from DN 300 or 340 x 240 mm openings
- 310 x 230 x 210 mm, 18 kg, -20 to +60 C
技術仕様
| 本体 | |
| 重量 | 18 kg |
|---|---|
| 寸法 | L 310 mm × W 230 mm × H 210 mm |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 0.3 km/h |
| 使用環境 | Inside steel process pipelines DN 300-1400 of gas compressor stations and similar plant piping, including vertical and dirty sections, -20°C to 60°C |
| 電源 | |
| バッテリー駆動時間 | 480 min |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
| 本体 | |
| 重量 | 18 kg |
|---|---|
| 寸法 | L 310 mm × W 230 mm × H 210 mm |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 0.3 km/h |
| 使用環境 | Inside steel process pipelines DN 300-1400 of gas compressor stations and similar plant piping, including vertical and dirty sections, -20°C to 60°C |
| 電源 | |
| バッテリー駆動時間 | 480 min |
画像







投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the A2072 IntroScan?
A2072 IntroScan is an autonomous robotic in-line scanner-flaw detector for steel process pipelines, used above all on the piping of gas compressor stations.
Who makes the A2072 IntroScan?
The A2072 IntroScan is made by IntroScan Technology, a robotics company based in Russia.
How much does the A2072 IntroScan cost?
IntroScan Technology has not publicly announced pricing for the A2072 IntroScan. You can enquire through RobotAIGeek for current pricing.
What is the A2072 IntroScan used for?
The A2072 IntroScan is designed for データ収集, 点検, and スキャン. It is used in エネルギー and 製造 settings.
How much does the A2072 IntroScan weigh?
The A2072 IntroScan weighs 18 kg.
How fast is the A2072 IntroScan?
The A2072 IntroScan can move at speeds of up to 0.3 km/h.
What is the battery life of the A2072 IntroScan?
The A2072 IntroScan runs for about 480 minutes on a charge.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- A2072 IntroScan vs TRF 500
- A2072 IntroScan vs SIGMA 100D
- A2072 IntroScan vs SIGMA 250A
- A2072 IntroScan vs SIGMA 150
- A2072 IntroScan vs SIGMA 200











