BESCHREIBUNG
Baby Orca Plus is DeepBlue's stone-maintenance robot, and the distinction from an ordinary scrubber matters: alongside washing floors it runs a stone-curing pass, carrying an 8-litre container of nursing solution to repair scratches, raise gloss, harden the surface and improve slip resistance. That is a slower job than cleaning, and the machine is rated accordingly — up to 2400 m2/h scrubbing but up to 500 m2/h when polishing. It cleans a 660 mm path with two 13-inch brush trays turning at up to 220 rpm under 27 kg of cleaning pressure, and an 800 mm squeegee recovers the water behind it. Clean and waste tanks hold 60 litres each. An 80 Ah battery gives roughly 12 hours of dust pushing, 3.5 hours of scrubbing or 2 hours of polishing, and the machine is rated at 1600 W nominal power, with separate motors for driving (2 x 300 W), disc scrubbing (2 x 350 W) and water recovery (340 W). It comes in two body lengths — 880 mm for the dust-free configuration and 1180 mm for the dust-containing one, both 800 mm wide and 1100 mm tall. Wi-Fi and 4G connectivity are fitted and it runs at or below 70 dB.
FUNKTIONEN
- Combined floor cleaning and stone maintenance in one machine
- Stone curing with an 8 L nursing-solution container: scratch repair, gloss, hardening, wear and slip resistance
- Cleaning efficiency up to 2400 m2/h
- Polishing efficiency up to 500 m2/h
- Cleaning width 660 mm
- Brush trays 13-inch x 2
- squeegee width 800 mm
- Brush speed up to 220 rpm
- cleaning pressure 27 kg
- Clean and sewage tanks 60 L each
- 80 Ah battery: 12 h dust pushing, 3.5 h scrubbing, 2 h polishing
- Nominal power 1600 W
- drive motors 2 x 300 W, scrubbing motors 2 x 350 W, water-recovery motor 340 W
- Two body configurations: 880 x 800 x 1100 mm dust-free, 1180 x 800 x 1100 mm dust-containing
- Wi-Fi and 4G connectivity
- Operating noise 70 dB or less
- Weight 150 kg
TECHNISCHE DATEN
| Physisch | |
| Gewicht | 150 kg |
|---|---|
| Abmessungen | L 880 mm × W 800 mm × H 1.1 m |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Einsatzumgebung | Indoor stone and hard floors in commercial and public buildings |
| Energie | |
| Akkulaufzeit | 12 h dust pushing, 3.5 h floor washing, 3 h stone curing |
| Ladeart | Dock |
| Sensorik & Rechenleistung | |
| Konnektivität | Wi-Fi |
| Software / KI | Proprietory software |
TECHNISCHE DATEN
| Physisch | |
| Gewicht | 150 kg |
|---|---|
| Abmessungen | L 880 mm × W 800 mm × H 1.1 m |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Einsatzumgebung | Indoor stone and hard floors in commercial and public buildings |
| Energie | |
| Akkulaufzeit | 12 h dust pushing, 3.5 h floor washing, 3 h stone curing |
| Ladeart | Dock |
| Sensorik & Rechenleistung | |
| Konnektivität | Wi-Fi |
| Software / KI | Proprietory software |
Bilder
martti
Bildbeiträge
Videos
ROBOTER-FOREN
Foren werden geladen...
BEWERTUNGEN
HÄUFIG GESTELLTE FRAGEN
What is the Baby Orca Plus?
Baby Orca Plus is DeepBlue's stone-maintenance robot, and the distinction from an ordinary scrubber matters: alongside washing floors it runs a stone-curing pass, carrying an 8-litre container of nursing solution to repair scratches, raise gloss, harden the surface and improve slip resistance.
Who makes the Baby Orca Plus?
The Baby Orca Plus is made by DeepBlue Technology, a robotics company based in China.
How much does the Baby Orca Plus cost?
DeepBlue Technology has not publicly announced pricing for the Baby Orca Plus. You can enquire through RobotAIGeek for current pricing.
What is the Baby Orca Plus used for?
The Baby Orca Plus is designed for reinigung and polieren. It is used in gewerbe, gebäudemanagement, and reinigung & gebäudemanagement settings.
How much does the Baby Orca Plus weigh?
The Baby Orca Plus weighs 150 kg.
What is the battery life of the Baby Orca Plus?
The Baby Orca Plus runs for 12 h dust pushing, 3.5 h floor washing, 3 h stone curing on a charge.
MIT ÄHNLICHEN ROBOTERN VERGLEICHEN
Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt
Alternativen zu Baby Orca Plus →