説明
Marvin Pro+M6はTianji GentoのHumanoidです。 組立、研究向けに設計されています。 主な数値：可搬質量 6 kg、リーチ 695 mm、14 自由度。
Marvin Pro+M6 is a fixed-base dual-arm humanoid robot from Tianji built for industrial assembly and laboratory work. Each of its two seven-axis arms is rated for 6 kg (10 kg maximum) over a 695 mm working radius, with joint-level force control, compliant impedance control and collision protection. A five-camera panoramic set — three in the head and one per wrist — handles visual positioning, point-cloud capture and trajectory guidance, and an NVIDIA Jetson Orin AGX 64 GB platform delivering 275 TOPS runs the perception and control stack under ROS 2.
特長
- 14 degrees of freedom: two 7-DoF arms, 6 kg rated each
- 695 mm working radius per arm
- ±0.03 mm repeatability from a rigid fixed base
- Compliant impedance control with collision protection
- Five-camera panoramic vision (three head, two wrist)
- NVIDIA Jetson Orin AGX 64 GB, 275 TOPS, ROS 2 support
技術仕様
検証済み| 本体 | |
| 可搬重量 | 6 kg |
|---|---|
| リーチ | 695 mm |
| 繰り返し精度 | ±0.03 mm |
| 移動性能 | |
| 移動方式 | 二足歩行, ヒューマノイド |
| 自由度 | 14 |
| センシング・演算 | |
| 接続性 | 1 kHz EtherCAT; end-effector RS485, CAN, EtherCAT |
技術仕様
検証済み| 本体 | |
| 可搬重量 | 6 kg |
|---|---|
| リーチ | 695 mm |
| 繰り返し精度 | ±0.03 mm |
| 移動性能 | |
| 移動方式 | 二足歩行, ヒューマノイド |
| 自由度 | 14 |
| センシング・演算 | |
| 接続性 | 1 kHz EtherCAT; end-effector RS485, CAN, EtherCAT |
画像
投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Marvin Pro+M6?
Marvin Pro+M6 is a fixed-base dual-arm humanoid robot from Tianji built for industrial assembly and laboratory work. Each of its two seven-axis arms is rated for 6 kg (10 kg maximum) over a 695 mm working radius, with joint-level force control, compliant impedance control and collision protection.
Who makes the Marvin Pro+M6?
The Marvin Pro+M6 is made by Tianji Gento, a robotics company based in China.
How much does the Marvin Pro+M6 cost?
Tianji Gento has not publicly announced pricing for the Marvin Pro+M6. You can enquire through RobotAIGeek for current pricing.
What is the Marvin Pro+M6 used for?
The Marvin Pro+M6 is designed for 組立 and 研究. It is used in 自動車, エレクトロニクス, and 製造 settings.
What is the payload capacity of the Marvin Pro+M6?
The Marvin Pro+M6 has a payload capacity of 6 kg and a reach of 695 mm.
How many degrees of freedom does the Marvin Pro+M6 have?
The Marvin Pro+M6 has 14 degrees of freedom.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Marvin Pro+M6 vs KUAVO 5 / 5-W
- Marvin Pro+M6 vs AlphaBot 2
- Marvin Pro+M6 vs Oli
- Marvin Pro+M6 vs Noetix N2
- Marvin Pro+M6 vs RoBee
